open-iscsi (2.0.873+git0.3b4b4500-8+deb8u1) stable; urgency=medium

  * [725c5c6] Populate udebs in every architecture they are built
    (Closes: #784092)

 -- Christian Seiler <christian@iwakd.de>  Wed, 13 May 2015 20:01:02 +0200

open-iscsi (2.0.873+git0.3b4b4500-8) unstable; urgency=medium

  * [e707e75] Exclude iscsid.conf from dh_fixperms. (Closes: #735773)

 -- Christian Seiler <christian@iwakd.de>  Tue, 10 Feb 2015 18:00:54 +0100

open-iscsi (2.0.873+git0.3b4b4500-7) unstable; urgency=medium

  [ Ritesh Raj Sarraf ]
  * [8ed5fd2] Revert changes introduced in 2.0.873+git0.3b4b4500-5

  [ Christian Seiler ]
  * [cea864b] Clean up sysvinit ordering w.r.t. NFS.
  * [9097d07] Remove debian/gbp.conf again (change doesn't fit release
    criteria).

 -- Christian Seiler <christian@iwakd.de>  Mon, 09 Feb 2015 16:32:52 +0100

open-iscsi (2.0.873+git0.3b4b4500-6) unstable; urgency=medium

  [ Christian Seiler ]
  * Replace $remote_fs from Should-Start/Stop in init script with
    $local_fs and mountnfs-bootclean. (Breaks ordering cycle on
    systemd systems.)
  * Create systemd drop-in to create Before-dependency on
    remote-fs-pre.target and run umountiscsi.sh on stop.

 -- Ritesh Raj Sarraf <rrs@debian.org>  Sat, 31 Jan 2015 11:47:18 +0530

open-iscsi (2.0.873+git0.3b4b4500-5) unstable; urgency=medium

  [ Christian Seiler ]
  * Create systemd unit, make it order before remote-fs-pre.target to
    fix hang at boot. Unit currently only starts init script.
  * Manually start umountiscsi.sh in open-iscsi init script to make
    the stop action on shutdown not be a noop. (systemd tracks service
    state)
  * Add dh-systemd to build-deps.
  * Reorder #DEBHELPER# in postinst to not break upgrades (dh-systemd's
    code has to be there before invoke-rc.d is called).

  [ Ritesh Raj Sarraf ]
  * [fa0ce1c] Install iscsid.conf with permission 600 (Closes: #735773)
  * [eeb3e90] Don't wait in detecting disks when run under systemd.
    Thanks to Christian Seiler (Closes: #775778)
  * [641f3ee] Add gbp.conf
  * [cff497b] Add iscsi.service as an Alias

 -- Ritesh Raj Sarraf <rrs@debian.org>  Mon, 26 Jan 2015 13:04:33 +0530

open-iscsi (2.0.873+git0.3b4b4500-4) unstable; urgency=medium

  * [41c7eca] Introduce new architectures based on current build
    status of the Debian Installer (Closes: #759817)

 -- Ritesh Raj Sarraf <rrs@debian.org>  Mon, 01 Sep 2014 14:32:59 +0530

open-iscsi (2.0.873+git0.3b4b4500-3) unstable; urgency=medium

  * [56e20ac] Revert "Add patch to enable fsck, mount and swap
    for network block devices"
  * [517546c] Handle network swap devices (blocks) (Closes: #756843)

 -- Ritesh Raj Sarraf <rrs@debian.org>  Wed, 20 Aug 2014 19:08:39 +0530

open-iscsi (2.0.873+git0.3b4b4500-2) unstable; urgency=medium

  [ Philipp Hug ]
  * [b517ebb] Start open-iscsi after installation and make sure
    initiatorname is generated.

  [ Ritesh Raj Sarraf ]
  * [7e1ae42] Add patch to enable fsck, mount and swap for network
    block devices. Thanks to Turbo Fredriksson (Closes: #736349)
  * [92ac387] Don't prematurely exit when encountering targets with
    no block device. Thanks to Sammy Atmadja (Closes: #745708)
  * [7363428] Add autotools-dev for updated config.{sub,guess}. Also add
    dh-autoreconf in build-depends to support new architectures.
    Thanks to Chen Baozi <baozich@gmail.com> and Wookey (Closes: 750610)

 -- Ritesh Raj Sarraf <rrs@debian.org>  Thu, 26 Jun 2014 13:05:48 +0530

open-iscsi (2.0.873+git0.3b4b4500-1) unstable; urgency=low

  * [53a1224] Fix typo in README.
    Thanks to Jim Paris (Closes: #693559)
  * [1fcfdb8] Imported Upstream version 2.0.873+git0.3b4b4500
    (Closes: #722562)
  * [2280fc1] Refresh Patches
  * [ca1c9b9] Enable standard hardening knobs
  * [d73fe1e] Drop patch -03_hardened-build-flags.patch
  * [4599ae0] Update Vcs links
  * [728c154] Try harder to determine an iSCSI block device.
    Thanks to Dennis Leeuw, Philip Freeman (Closes: #691732)
  * [1b68764] Call udev to settle so that network device is available.
    Thanks to Jim Paris (Closes: #693558)
  * [2478ad6] Don't allow iscsid to get killed during shutodown.
    Thanks to Wakko Warner (Closes: #700762)

 -- Ritesh Raj Sarraf <rrs@debian.org>  Tue, 05 Nov 2013 21:45:47 +0530

open-iscsi (2.0.873-3) unstable; urgency=low

  * [4939401] Fix build to install udeb stuff only on supported architectures

 -- Ritesh Raj Sarraf <rrs@debian.org>  Wed, 27 Jun 2012 22:36:05 +0530

open-iscsi (2.0.873-2) unstable; urgency=low

  * [0019fa9] Restrict architecture for the udeb package as its dependency,
    scsi-modules, is not available on all the architecture paltforms

 -- Ritesh Raj Sarraf <rrs@debian.org>  Tue, 26 Jun 2012 18:54:17 +0530

open-iscsi (2.0.873-1) unstable; urgency=low

  * [53943f2] Load iscsi_ibft module to allow target session over iBFT.
    Thanks to JOORIS Emmanuel (Closes: #672122)
  * [ca41744] Delete old obsolete patches
  * [01a54bf] Drop old manpages already available upstream
  * [caf884c] ship upstream manpages for iscsi-iname and iscsistart
  * [a983848] Imported Upstream version 2.0.873

 -- Ritesh Raj Sarraf <rrs@debian.org>  Mon, 21 May 2012 23:54:53 +0530

open-iscsi (2.0.872+git0.6676a1cf-2) unstable; urgency=low

  * Upload to unstable
  * [cb80472] Fix default iscsid path in config file.
    Thanks to Michal Suchanek (Closes: #650221)

 -- Ritesh Raj Sarraf <rrs@debian.org>  Tue, 24 Apr 2012 09:41:08 +0530

open-iscsi (2.0.872+git0.6676a1cf-1) experimental; urgency=low

  [ Ritesh Raj Sarraf ]
  * New Upstream git snapshot (Closes: #645752) 
  * [ce26f7c] Imported Upstream version 2.0.872+git0.6676a1cf
  * [9ad08d7] also include iscsitart in the udeb
  * [bc79ad2] refresh patch debian/patches/spelling-error-fixes.patch
  * [0286328] refresh patch 004_make-iscsistart-a-dynamic-binary.patch
  * [360a509] Drop patches:
    + iscsi-dont-build-with-ssl.patch and
    + disable-isns-security.patch
  * [350db4d] rename and reorder patches
  * [794fa4f] Package-Type is now an understood feild by dpkg
  * [593f187] Add hardened build flags.
    Thanks to Moritz Muehlenhoff (Closes: #659662)
  * [cf4c6c3] Kill iscsid processes properly, on stop.
    Thanks to Gwendal Grignou (Closes: #665966)
  * [f1a9d2f] linitan fixes for spelling errors and manpage hyphen errors
  * [a8560c8] add and fix lsb headers for init files

  [ Colin Watson ]
  * [156b745] open-iscsi: add a udeb (Closes: #635161)

 -- Ritesh Raj Sarraf <rrs@debian.org>  Sat, 07 Apr 2012 21:02:37 +0530

open-iscsi (2.0.872-2) unstable; urgency=low

  * Upload to unstable 

 -- Ritesh Raj Sarraf <rrs@debian.org>  Wed, 14 Sep 2011 14:26:00 +0530

open-iscsi (2.0.872-1) experimental; urgency=low

  * New Upstream Release  
  * [cccd5a9] Use udevadm to check for existense of udev.
    Thanks to Marco d'Itri (Closes: #622209)
  * [ddb81e4] Drop patches, merged upstream
  * [25aa1d9] disable security and slp support
  * [89b2a6a] Add patch to disable ssl.
    Thanks to Mike Christie
  * [d70e88a] Refresh patch
  * [b501aec] delete debian/patches/disable-isns.patch
  * [2cc67f7] spelling-error and hyphentation fixes
  * [b886116] Bump Standards Version to 3.9.2
  * [405ecfd] add autotools-dev to build-dep to ensure we have no stale
    configure scripts

 -- Ritesh Raj Sarraf <rrs@debian.org>  Fri, 26 Aug 2011 16:21:38 +0530

open-iscsi (2.0.871.3-6) unstable; urgency=low

  * [87c440c] fix gcc 4.6 build failure (Closes: #625152)

 -- Ritesh Raj Sarraf <rrs@debian.org>  Tue, 03 May 2011 00:22:07 +0530

open-iscsi (2.0.871.3-5) unstable; urgency=low

  * Last upload was incorrect. Really upload to unstable 

 -- Ritesh Raj Sarraf <rrs@debian.org>  Sat, 12 Feb 2011 02:00:34 +0530

open-iscsi (2.0.871.3-4) unstable; urgency=low

  * Reupload to unstable 

 -- Ritesh Raj Sarraf <rrs@debian.org>  Thu, 10 Feb 2011 20:17:07 +0530

open-iscsi (2.0.871.3-3) experimental; urgency=low

  * Install iscsid.conf with 0600 permission as it can contain passwords
    (Closes: #472965)
  * Provide an example for iSCSI root installation (Closes: #492358) 
  * Add support to enable multiple session to the iSCSI Target in the
    initramfs. Thanks to Norbert Tretkowski for the patch.
    (Closes: #598773) 
  * Add patch to support NICs that have native iSCSI support. Thanks to
    Bjoern Metzdorf for the patch. (Closes: #514924) 
  * cherry pick commit f0b670c0 from upstrem (Closes: #603990)
  * Bump Standards Version (No changes required) 

 -- Ritesh Raj Sarraf <rrs@debian.org>  Wed, 05 Jan 2011 13:43:42 +0545

open-iscsi (2.0.871.3-2) unstable; urgency=low

  * Break down and add quilt patches
    + 003_Fix-CVE-2009-1297.patch
    + 004_make-iscsistart-a-dynamic-binary.patch
  * Add some explanation about initiatorname.iscsi into README.Debian
    (Closes: #507003) 
  * Fix double variable assignment in initramfs.local-top. Thanks to Aurelien
    Jarno (Closes: #576786) 
  * Document the odd hang behavior during iSCSI login phase when using 32 bit
    open-iscsi with 64 bit kernel 
  * Change address to my official Debian address and remove the DMUA flag
  * Handle iSCSI LVM devices and devices marked _netdev (Closes: #498616) 
  * Switch to 3.0 (quilt) source format 

 -- Ritesh Raj Sarraf <rrs@debian.org>  Fri, 11 Jun 2010 12:33:02 +0530

open-iscsi (2.0.871.3-1) unstable; urgency=low

  * New upstream release (Closes: #564012, #566511) 
  * When open-iscsi service is asked to stop, attempt to umount all iSCSI
    devices. On failure, bail out (Closes: #501580, #499126) 
  * Add debian/source/format specifying the current source format 

 -- Ritesh Raj Sarraf <rrs@researchut.com>  Wed, 24 Mar 2010 21:44:38 +0530

open-iscsi (2.0.871-1) unstable; urgency=low

  [ Guido Günther ]
  * Imported Upstream version 2.0.871

  [ Ritesh Raj Sarraf ]
  * New Upstream Release - 2.0.871
    (Closes: #424642)
  * Fix credential passing in local-top/initramfs.local-top
    (Closes: #550012, #525053)
  * Fix settling of devices in initramfs (Closes: #501582, #488999)
  * Update Standards-Version to 3.8.4
  * Change to team maintenance
  * Add git-orig-source target
  * Add debian/watch file
  * Add README.source file
  * Add quilt patches
  * Add Vcs headers
  * Update debhelper to v7
  * Update copyright information
  * Improve description (Closes: #504707)
  * Stop umountiscsi and open-iscsi in runlevel 1
  * Remove already obsolete disabled-install-indep target
  * Replace deprecated dh_clean -k with dh_prep
  * Refresh 001_manpages_fixes.patch
  * Fix copyright and explain packaging licensing
  * Fix "undefined reference to strl* when building iscsid"
  * Proper sanity check in the init script for empty strings
    (Closes: #501319)
  * Provide init script service with the same name
  * Build iscsistart as a dynamic binary

 -- Ritesh Raj Sarraf <rrs@researchut.com>  Sat, 06 Feb 2010 20:28:23 +0530

open-iscsi (2.0.870~rc3-0.6) unstable; urgency=low

  * Non-maintainer upload.
  * [4bfddee] Fix CVE-2009-1297 (Closes: #547011) - thanks to Colin Watson for
    the patch

 -- Guido Günther <agx@sigxcpu.org>  Sat, 23 Jan 2010 17:56:18 +0100

open-iscsi (2.0.870~rc3-0.5) unstable; urgency=low

  * Non-maintainer upload to fix release goal.
  * Fix incorrect provides and dependencies in init.d script (Closes:
    #541390).
  * Add missing package dependency on udev.  Rewrite init.d script to use
    'udevadm settle' instead of obsolete 'udevsettle' (Closes: #517225).
  * No longer ignore errors in the postinst.  Tip from lintian.
  * Do not start open-iscsi init.d script during package installation,
    to avoid installation problem (Closes: #529280).

 -- Petter Reinholdtsen <pere@debian.org>  Sun, 13 Sep 2009 20:25:49 +0200

open-iscsi (2.0.870~rc3-0.4) unstable; urgency=medium

  * Clean up diff.gz, it downgraded the package to 2.0.869.2.
    (closes: #507496)

 -- Norbert Tretkowski <nobse@debian.org>  Thu,  8 Jan 2009 11:19:23 +0100

open-iscsi (2.0.870~rc3-0.3) unstable; urgency=low

  * Non-maintainer upload.
  * Do not exit with return code 1 in init script, because it breaks
    upgrades and is a policy violation (Closes: #503070)

 -- Patrick Schoenfeld <schoenfeld@debian.org>  Mon, 27 Oct 2008 10:21:17 +0100

open-iscsi (2.0.870~rc3-0.2) unstable; urgency=low

  * Non-maintainer upload.
  * Drop patch from iscsistart.c which breaks booting from iscsi.
    (closes: #499508)
  * Drop patch from version.h which adds an outdated upstream version
    number.

 -- Norbert Tretkowski <nobse@debian.org>  Fri, 10 Oct 2008 10:46:56 +0200

open-iscsi (2.0.870~rc3-0.1) unstable; urgency=low

  * Non-maintainer upload.
  * New upstream release
    - Adds support for Linux 2.6.26 (Closes: #499508)
  * Fix ">&" redirection bashism in open-iscsi initscript.

 -- Chris Lamb <lamby@debian.org>  Tue, 30 Sep 2008 21:40:27 +0100

open-iscsi (2.0.869.2-2.1) unstable; urgency=medium

  * Non-maintainer upload.
  * Fix bashism in debian/rules (Closes: #484427)
    - Move upstream URL to Homepage field.
    - Bump Standards-Version to 3.8.0.

 -- Chris Lamb <chris@chris-lamb.co.uk>  Fri, 11 Jul 2008 23:20:18 +0100

open-iscsi (2.0.869.2-2) unstable; urgency=low

  * Revert if-up.d approach for logging into automatic targets; just
    start open-iscsi at rcS.d/S45, and mount _netdev filesystems when
    open-iscsi is started.
  * Call udevsettle before mounting

 -- Philipp Hug <debian@hug.cx>  Mon, 12 May 2008 12:48:49 +0200

open-iscsi (2.0.869.2-1) unstable; urgency=low

  * New upstream release

 -- Philipp Hug <debian@hug.cx>  Mon, 12 May 2008 11:56:30 +0200

open-iscsi (2.0.869~rc4-1) experimental; urgency=low

  * init script: If /sys is not mounted return without error
    (Closes: #470434, #423368)
  * Merged changes by Andrew Moise <chops@demiurgestudios.com>
  * Adding Andrew as Co-Maintainer
  * New upstream release (Closes: #474167)
  * Added flex and bison build-depends
  * Fixed up init scripts to attempt to handle automatic mounting and
    unmounting properly (Closes: #423851, #438542)
  * Added /etc/network/if-up.d/000open-iscsi to start automatic targets
  * Parameterized /etc/iscsi/initiatorname.iscsi in init script,
    correcting one place where it still said /etc/initiatorname.iscsi
  * Updated README.Debian
  * Include iscsistart for use in initramfs (Closes: #419408)
  * Add initramfs scripts to make iSCSI root easy
  * Based on patch by Guido Guenther <agx@sigxcpu.org>

 -- Philipp Hug <debian@hug.cx>  Sat, 12 Apr 2008 15:53:12 +0200

open-iscsi (2.0.865-1) unstable; urgency=low

  * New upstream release
  * Removed iscsi-iname patch as it's now included in upstream
  * Moved initiatorname.iscsi to /etc/iscsi/initiatorname.iscsi

 -- Philipp Hug <debian@hug.cx>  Sat, 16 Jun 2007 12:31:05 +0200

open-iscsi (2.0.730-1) unstable; urgency=low

  * Reverted to upstream init script + patches (Closes: #397363 #401579)
  * Removed libdb dependency
  * Create /etc/iscsi
  * Integrated NMU changes from Martin Zobel-Helas
     + New Upstream Release (Closes: #397636)
     + Made /var/lib/open-iscsi 0700 (Closes: #398733)
     + change #define INITIATOR_NAME_FILE to /etc/initiatorname.iscsi
       in usr/initiator.h
     + Fix package description (Closes: #380162)

 -- Philipp Hug <debian@hug.cx>  Wed,  6 Dec 2006 20:22:30 +0100

open-iscsi (1.0.485-4) unstable; urgency=low

  * Removed bash-ism from init script
  * Added hint about autostart to README.Debian
  * Improved description a bit (Closes: #380162)

 -- Philipp Hug <debian@hug.cx>  Mon, 21 Aug 2006 19:55:40 +0200

open-iscsi (1.0.485-3) unstable; urgency=low

  * Added description to man page

 -- Philipp Hug <debian@hug.cx>  Sun, 23 Jul 2006 19:08:48 +0200

open-iscsi (1.0.485-2) unstable; urgency=low

  * Moved package to unstable
  * Removed unused section in control
  * Updated Standards-Version to 3.7.2.1
  * Added INIT INFO section to init script to make it lsb compliant
  * Removed unusued lines in rules
  * Added man page for iscsi-iname

 -- Philipp Hug <debian@hug.cx>  Sat, 22 Jul 2006 19:45:35 +0200

open-iscsi (1.0.485-1) experimental; urgency=low

  * Install iscsid.conf in /etc/iscsid.conf instead of /etc/iscsid.conf-example

 -- Philipp Hug <debian@hug.cx>  Tue, 27 Jun 2006 14:42:20 +0200

open-iscsi (1.0.485-0unreleased) dapper; urgency=low

  * Initial Release (closes: Bug#333695)
  * Updated init script
  * Automatically generate iscsi initiator name
  * Use Debian specific initator name prefix
  * Put database into /var/lib/open-iscsi

 -- Philipp Hug <debian@hug.cx>  Mon,  6 Mar 2006 19:20:17 +0000

