--- gtk+2.0-2.0.2.orig/debian/scripts/getglibcversion
+++ gtk+2.0-2.0.2/debian/scripts/getglibcversion
@@ -0,0 +1,56 @@
+#!/bin/sh
+# GNU C library version detection shell script.
+# Copyright 1999 Branden Robinson.
+# Licensed under the GNU General Public License, version 2.  See the file
+# /usr/share/common-licenses/GPL or <http://www.gnu.org/copyleft/gpl.txt>.
+
+# This script probably makes about a billion too many assumptions, but it's
+# better than hardcoding the glibc version on a per-architecture basis.
+
+set -e
+
+usage () {
+  echo "Usage: getglibcversion [option]"
+  echo "  Where [option] may be one of:"
+  echo "  --major      return major version only"
+  echo "  --minor      return minor version only"
+  echo "  --point  return ittybitty version only"
+  echo "With no option, returns major.minor.ittybitty .";
+}
+
+case $# in
+  0) ;;
+  1) case $1 in
+       --help) usage
+               exit 0 ;;
+       --major) RETURN=1 ;;
+       --minor) RETURN=2 ;;
+       --point) RETURN=3 ;;
+       *) exec 1>&2
+          usage
+          exit 1 ;;
+     esac ;;
+  *) exec 1>&2
+     usage
+     exit 1 ;;
+esac
+
+LIBCLIST=$(cd /lib && ls libc-*.so)
+
+case $(echo $LIBCLIST | wc -l | awk '{print $1}') in
+  0) echo "No GNU C library found!  Aborting." >&2
+     exit 1 ;;
+  1) ;;
+  *) echo "Multiple versions of GNU C library found!  Aborting." >&2
+     exit 1 ;;
+esac
+
+LIBCVERSION=$(echo $LIBCLIST | sed 's/libc-//;s/\.so//')
+
+if [ -z $RETURN ]; then
+  echo $LIBCVERSION
+else
+  echo $LIBCVERSION | cut -d. -f$RETURN
+fi
+
+exit 0
--- gtk+2.0-2.0.2.orig/debian/scripts/Makefile
+++ gtk+2.0-2.0.2/debian/scripts/Makefile
@@ -0,0 +1,11 @@
+#!/usr/bin/make -f
+all: sh.vars mk.vars
+
+clean:
+	rm -f sh.vars mk.vars
+
+mk.vars: vars.build vars
+	$(SHELL) vars.build vars make > $@
+sh.vars: vars.build vars
+	$(SHELL) vars.build vars shell > $@
+
--- gtk+2.0-2.0.2.orig/debian/scripts/archmap
+++ gtk+2.0-2.0.2/debian/scripts/archmap
@@ -0,0 +1,22 @@
+#!/bin/sh
+# i486 i386 i486 i586 pentium pentiumpro
+if [ $(basename $0) = archmap ];then
+	if [ -z $1 ];then
+        	arch=$(dpkg --print-gnu-build-architecture)
+	else
+		arch=$1
+	fi
+else
+	if [ -z $arch ];then
+        	arch=$(dpkg --print-gnu-build-architecture)
+	fi
+fi
+set -- $(egrep ".* $arch( .*|$)" debian/scripts/archmap)
+if [ -z $2 ];then
+       	arch=$arch
+else
+       	arch=$2
+fi
+if [ $(basename $0) = archmap ];then
+	echo $arch
+fi
--- gtk+2.0-2.0.2.orig/debian/scripts/messages
+++ gtk+2.0-2.0.2/debian/scripts/messages
@@ -0,0 +1,29 @@
+fix.source.patch:START:"Fixing upstream patch $1"
+fix.source.patch:OK:"successful."
+fix.source.patch:FAILED:"failed!"
+fix.source.patch:ALREADY_DONE:"upstream patch fixup $1 already applied!"
+
+unfix.source.patch:START:"Unfixing upstream patch $1
+unfix.source.patch:OK:"successful."
+unfix.source.patch:FAILED:"failed!
+unfix.source.patch:ALREADY_DONE:"upstream patch fixup $1 already reversed!"
+
+patch.unapply:START:"Reversing patch $1"
+patch.unapply:OK:"successful."
+patch.unapply:FAILED:"failed!"
+patch.unapply:ALREADY_DONE:"Patch $1 not applied!"
+
+patch.apply:START:"Applying patch $1"
+patch.apply:OK:"successful."
+patch.apply:FAILED:"failed!"
+patch.apply:ALREADY_DONE:"Patch $1 already applied!"
+
+source.patch:START:"Applying upstream patch $1"
+source.patch:OK:"successful."
+source.patch:FAILED:"failed!"
+source.patch:ALREADY_DONE:"upstream patch $1 already applied!"
+
+source.unpack:START:"Extracting upstream tarball $1"
+source.unpack:OK:"successful."
+source.unpack:FAILED:"failed!"
+source.unpack:ALREADY_DONE:"upstream tarball $1 already extracted!"
--- gtk+2.0-2.0.2.orig/debian/scripts/lib
+++ gtk+2.0-2.0.2/debian/scripts/lib
@@ -0,0 +1,198 @@
+#!/bin/sh
+if [ $(basename $0) = lib ];then
+	make -C debian/scripts sh.vars
+	. debian/scripts/sh.vars
+fi
+fetchmsg() {
+	local msg
+	msg=$1;shift
+	eval echo $(sed -ne "s/^$(BASENAME):$msg://p" debian/scripts/messages)
+}
+START() {
+	echo -n "$(fetchmsg START "$@") "
+}
+OK() {
+	fetchmsg OK "$@"
+}
+FAILED() {
+	fetchmsg FAILED "$@"
+}
+ALREADY_DONE() {
+	fetchmsg ALREADY_DONE "$@"
+}
+
+BASENAME() {
+	local base
+	if [ "$cmd" ];then
+		base=$cmd
+	else
+		base=${0##*/}
+	fi
+	if [ x$base = x ];then
+		echo "Danger, Will Robinson, Danger!" 1>&2
+		echo "Bash is very confused." 1>&2
+		exit 1
+	fi
+	if [ x$base = xlib ];then
+		echo "You can't call this directly." 1>&2
+		echo "This is a library that should be sourced." 1>&2
+		exit 1
+	fi
+	echo $base
+}
+file2cat() {
+	$(decompress_prog $1) $1
+}
+debug() {
+	echo "$@"
+	eval "$@"
+}
+decompress_prog() {
+	local which
+	which="cat"
+	[ $1 != ${1%.tgz} -o $1 != ${1%.gz} -o $1 != ${1%.Z} ] && which="gunzip -c"
+	[ $1 != ${1%.bz2} ] && which="bunzip2 -c"
+	[ $1 != ${1%.bz} ] && which="bunzip -c"
+	echo $which
+}
+compress_ext() {
+	local which
+	which=""
+	[ $1 != ${1%.gz} ] && which=gz
+	[ $1 != ${1%.Z} ] && which=Z
+	[ $1 != ${1%.bz2} ] && which=bz2
+	[ $1 != ${1%.bz} ] && which=bz
+	echo $which
+}
+filetype_detect() {
+	local which f
+	which=""
+	f=$(echo "$1" | sed 's|:::.*||')
+	[ $f != ${f%.jar} ] && which=jarfile
+	[ $f != ${f%.zip} ] && which=zipfile
+	[ $f != ${f%.tgz} ] && which=tarball
+	[ $f != ${f%.tar.$(compress_ext $f)} ] && which=tarball
+	[ $f != ${f%.tar} ] && which=tarball
+	[ $f != ${f%.diff.$(compress_ext $f)} -o $1 != ${1%.patch.$(compress_ext $1)} ] && which=patch
+	[ $f != ${f%.diff} -o $1 != ${1%.patch} ] && which=patch
+	[ $f != ${f%.dsc} ] && which=dsc
+	echo $which
+}
+extract_tar() {
+	local which file dir curd
+	dir="$1"
+	shift
+	curd=$(pwd)
+	while [ $# -gt 0 ];do
+		file="$1"
+		[ "$file" = "${1#/}" ] && file="$curd/$file"
+		case "$(filetype_detect $file)" in
+			"jarfile")	(cd $dir;fastjar -xf $file);;
+			"zipfile")	(cd $dir;miniunzip -x $file);;
+			"tarball")	$(decompress_prog $file) $file | (cd $dir;tar xv);;
+			*)		echo "unsupported tarball";;
+		esac
+		shift
+	done
+}
+
+do.patching() {
+	filetmpl=\$d/\$f
+	reversesort=""
+	reversepatch=""
+
+	case "$cmd" in
+		source.patch)
+			mkdir -p $SOURCE_DIR/$TAR_DIR
+			patch_dirs="$SRC_PATCH_DIR $SRC_ADD_PATCH_DIR"
+			stampfiletmpl=\$STAMP_DIR/\$d/\$f
+			logtmpl=\$STAMP_DIR/log/\$d/\$f
+			dirprep="\$STAMP_DIR/log/\$d \$STAMP_DIR/\$d"
+			patchapplydirtmpl=\$SOURCE_DIR/\$TAR_DIR
+			;;
+		patch.apply)
+			mkdir -p $SOURCE_DIR/$TAR_DIR $STAMP_DIR/patches
+			patch_dirs="$PATCH_DIR $ADD_PATCH_DIR"
+			stampfiletmpl=\$STAMP_DIR/patches/\$f
+			logtmpl=\$STAMP_DIR/log/\$d/\$f
+			dirprep=\$STAMP_DIR/log/\$d
+			patchapplydirtmpl=\$SOURCE_DIR/\$TAR_DIR
+			;;
+		fix.source.patch)
+			if [ "$DBS_UNIFIED" -o ! -e debian/fixpatch ];then
+				exit
+			fi
+			mkdir -p $STAMP_DIR/fixpatch
+			patch_dirs=debian/fixpatch
+			stampfiletmpl="$STAMP_DIR/fixpatch/\$(basename \$f)"
+			logtmpl=\$STAMP_DIR/log/fixpatch/\$f
+			dirprep=\$STAMP_DIR/log/fixpatch
+			patchapplydirtmpl=upstream
+			;;
+		unfix.source.patch)
+			if [ "$DBS_UNIFIED" -o ! -e debian/fixpatch ];then
+				exit
+			fi
+			mkdir -p $STAMP_DIR/fixpatch
+			patch_dirs=debian/fixpatch
+			stampfiletmpl="$STAMP_DIR/fixpatch/\$(basename \$f)"
+			logtmpl=\$STAMP_DIR/log/fixpatch/\$f
+			dirprep=\$STAMP_DIR/log/fixpatch
+			patchapplydirtmpl=upstream
+			reversesort=-r
+			reversepatch=-R
+			;;
+	esac
+	for d in $patch_dirs;do
+		if [ ! -d $d ];then
+			continue
+		fi
+		eval mkdir -p $dirprep
+		for f in `(cd $d;find -type f ! -name 'chk-*' 2>/dev/null )|sort $reversesort`;do
+			eval stampfile=$stampfiletmpl
+			eval log=$logtmpl
+			eval file=$filetmpl
+			eval patchapplydir=$patchapplydirtmpl
+			if [ ! -e $stampfile ];then
+				START $file
+				if file2cat $file | (cd $patchapplydir;patch -p1 $reversepatch) > $log;then
+					OK $file
+					touch $stampfile
+				else
+					FAILED $file
+					exit 1
+				fi
+			else
+				ALREADY_DONE $file
+			fi
+		done
+	done
+
+}
+#
+# External api functions.
+#
+
+source.clean() {
+	if [ "$DBS_UNIFIED" ];then
+		exit
+	fi
+	rm -rf $SOURCE_DIR $STAMP_DIR/upstream $STAMP_DIR/patches
+	rm -f $STAMP_DIR/{source.{clean,build,make}}
+	return
+if [ x$SOURCE_DIR = x ];then
+	files=`find -type f -maxdepth 1 -mindepth 1`
+	dirs=`find -type d -maxdepth 1 -mindepth 1 ! -name 'debian' ! -name 'upstream'`
+        echo files=\"$files\"
+        echo dirs=\"$dirs\"
+fi
+
+}
+source.patch()		{ cmd=source.patch; do.patching; }
+fix.source.patch()	{ cmd=fix.source.patch; do.patching; }
+unfix.source.patch()	{ cmd=unfix.source.patch; do.patching; }
+patch.apply()		{ cmd=patch.apply; do.patching; }
+
+if [ $(basename $0) = lib ];then
+	$1
+fi
--- gtk+2.0-2.0.2.orig/debian/scripts/vars.build
+++ gtk+2.0-2.0.2/debian/scripts/vars.build
@@ -0,0 +1,17 @@
+#!/usr/bin/make -f
+
+sed_cmd=''
+cat $1 | while read REPLY; do
+	case "$REPLY" in
+		\#*|"")	continue;;
+		*)
+			var=$(echo $REPLY|sed 's/\([^=]*\)=.*/\1/')
+			eval $REPLY
+			if [ $2 = "make" ]; then
+				eval echo "$var=\$$var"
+			else
+				eval echo "$var=\\\"\$$var\\\""
+			fi
+			;;
+	esac
+done
--- gtk+2.0-2.0.2.orig/debian/scripts/vars
+++ gtk+2.0-2.0.2/debian/scripts/vars
@@ -0,0 +1,31 @@
+# This file is NOT a shell script.
+#
+# This file gets included by both debian/rules (make) AND the scripts in
+# debian/scripts (bash)
+#
+
+# Where to cd to to unpack all the tarballs.
+SOURCE_DIR=build-tree
+# For a single pkg, this is the directory that is embedded in the tarball.
+# For multiple pkgs, this is null.
+TAR_DIR=gtk+-2.0.2
+# Where to place all the stamp files.  This directory can be removed, and
+# all the targets will then be rerun.
+STAMP_DIR=debian/stampdir
+# When sys-build.mk is used to build the source, this is the target(s) to
+# run.
+BUILD_TARGET=
+# When cleaning the source, during diff generation, if this is set, this
+# target will be called in debian/rules.  This allows for pkgs that have
+# complicated cleaning rules.
+CLEAN_TARGET_EXTERNAL=
+# Whether to die if the source cleaning fails.
+CLEAN_IGNORE=yes
+# The clean target to run.  Defaults to clean.
+CLEAN_TARGET=distclean
+# Files to exclude from the diff.
+DIFF_EXCLUDE="Makefile.in configure"
+# Where the patches are located(duh!).
+PATCH_DIR=debian/patches
+SRC_PATCH_DIR=upstream/patches
+SRC_TAR_DIR=upstream/tarballs
--- gtk+2.0-2.0.2.orig/debian/scripts/source.unpack
+++ gtk+2.0-2.0.2/debian/scripts/source.unpack
@@ -0,0 +1,32 @@
+#!/bin/sh
+make -C debian/scripts sh.vars
+. debian/scripts/sh.vars
+. debian/scripts/lib
+
+mkdir -p $STAMP_DIR/upstream/tarballs/ $SOURCE_DIR
+if [ ! -z "$SRC_TAR_DIR" -a -d "$SRC_TAR_DIR" ];then
+	files=$(find $SRC_TAR_DIR -type f|sort)
+else
+	VER=$(dpkg-parsechangelog 2>&1|egrep ^Version|cut -d " " -f 2|cut -d "-" -f 1)
+	SRC=$(dpkg-parsechangelog 2>&1|egrep ^Source|cut -d " " -f 2-)
+	files=../${SRC}_${VER}.orig.tar.gz
+fi
+for f in $files;do
+	stampfile=$STAMP_DIR/upstream/tarballs/`basename $f`
+	if [ ! -e $stampfile ];then
+		START $f
+		if extract_tar ${SOURCE_DIR:-.} $f > $stampfile.log;then
+			if [ x$SOURCE_DIR = x ];then
+				mkdir -p $STAMP_DIR/upstream/files/tarballs
+				cp $stampfile.log $STAMP_DIR/upstream/files/tarballs/`basename $f`.list
+			fi
+			OK $f
+			touch $stampfile
+		else
+			FAILED $f
+			exit 1
+		fi
+	else
+		ALREADY_DONE $f
+	fi
+done
--- gtk+2.0-2.0.2.orig/debian/patches/000_gtk+2.0-2.0.2-bigendian.patch
+++ gtk+2.0-2.0.2/debian/patches/000_gtk+2.0-2.0.2-bigendian.patch
@@ -0,0 +1,12 @@
+diff -ruN gtk+-2.0.2.orig/gdk/x11/xsettings-client.c gtk+-2.0.2/gdk/x11/xsettings-client.c
+--- gtk+-2.0.2.orig/gdk/x11/xsettings-client.c	Wed May  1 02:38:02 2002
++++ gtk+-2.0.2/gdk/x11/xsettings-client.c	Wed May  1 02:40:17 2002
+@@ -169,7 +169,7 @@
+   if (BYTES_LEFT (buffer) < 1)
+     return XSETTINGS_ACCESS;
+ 
+-  *result = *(CARD32 *)buffer->pos;
++  *result = *(CARD8 *)buffer->pos;
+   buffer->pos += 1;
+ 
+   return XSETTINGS_SUCCESS;
--- gtk+2.0-2.0.2.orig/debian/docs
+++ gtk+2.0-2.0.2/debian/docs
@@ -0,0 +1,5 @@
+build-tree/gtk+-2.0.2/NEWS
+build-tree/gtk+-2.0.2/README
+build-tree/gtk+-2.0.2/TODO
+build-tree/gtk+-2.0.2/ChangeLog.pre-1-0
+build-tree/gtk+-2.0.2/ChangeLog.pre-1-2
--- gtk+2.0-2.0.2.orig/debian/sys-build.mk
+++ gtk+2.0-2.0.2/debian/sys-build.mk
@@ -0,0 +1,167 @@
+#!/usr/bin/make -f
+# Separate tarball/patch build system by Adam Heath <doogie@debian.org>
+
+# The magic targets that you need to concern yourself with are:
+#
+# source.build:		Unpacks upstream tarballs, optionally applies patches
+#			to fix the upstream patches, then applies upstream
+#			patches.
+# source.make:		Applies debian patches.
+# source.clean:		Cleans the build directory, then unfixes the upstream
+#			patches.
+# source.compile:	Will compile the source for you.  Please check
+#			debian/scripts/vars.
+# source.cmd:		When calling this target, if you define a variable
+#			SOURCE_CMD, it will run that command in the build
+#			tree.
+# make-diff:		Generates debian.diff in the current directory which
+#			contains all edits that are currently in the build
+#			tree.
+#
+# Nothing in this file should require any editting.  Please look at
+# debian/scripts/vars for things to change for the local environment.
+#
+# debian/rules target		command
+# ----------------------------------------------------------------
+# clean:			$(MAKE) -f debian/sys-build.mk source.clean
+# build:			$(MAKE) -f debian/sys-build.mk source.compile
+#					for simple systems.
+# build:			$(MAKE) -f debian/sys-build.mk source.make
+#					and, in the rules file, you can
+#					build the targets you want.
+SHELL=/bin/bash
+ifndef NOISY
+.SILENT:
+endif
+
+include debian/scripts/vars
+# remove quotes
+DIFF_EXCLUDE:=$(patsubst %,-x %,$(shell echo $(DIFF_EXCLUDE)))
+
+ifdef TAR_DIR
+BUILD_TREE=$(SOURCE_DIR)/$(TAR_DIR)
+else
+BUILD_TREE=$(SOURCE_DIR)
+endif
+
+SOURCE_CMD=:
+
+ifdef CLEAN_IGNORE
+	CLEAN_CMD=-
+	CLEAN_SH=
+else
+	CLEAN_CMD=
+	CLEAN_SH=
+endif
+ifndef CLEAN_TARGET
+	CLEAN_TARGET=clean
+endif
+
+foo:
+	echo $(DIFF_EXCLUDE)
+
+make-diff:
+	mv $(BUILD_TREE) bak
+	$(MAKE) -f debian/sys-build.mk source.clean
+	$(MAKE) -f debian/sys-build.mk source.make
+	mv $(BUILD_TREE) $(BUILD_TREE).orig
+	mv bak $(BUILD_TREE)
+
+ifdef TAR_DIR
+ifdef CLEAN_TARGET_EXTERNAL
+	$(CLEAN_CMD)$(MAKE) -f debian/rules $(CLEAN_TARGET_EXTERNAL)
+else
+	$(CLEAN_CMD)$(MAKE) -C $(BUILD_TREE) $(CLEAN_TARGET)
+endif
+	-(cd $(SOURCE_DIR);diff -ruN $(TAR_DIR).orig $(TAR_DIR) $(DIFF_EXCLUDE)) > debian.diff
+else
+ifdef CLEAN_TARGET_EXTERNAL
+	$(CLEAN_CMD)$(MAKE) -f debian/rules $(CLEAN_TARGET_EXTERNAL)
+else
+	$(CLEAN_CMD)for a in $(BUILD_TREE)/*;do $(MAKE) -C $$a $(CLEAN_TARGET);done
+endif
+	-(diff -ruN $(BUILD_TREE).orig $(BUILD_TREE) $(DIFF_EXCLUDE)) > debian.diff
+	if [ ! -s debian.diff ];then\
+		rm debian.diff;\
+	fi
+endif
+	rm -rf $(BUILD_TREE).orig
+
+patchapply: $(STAMP_DIR)/patchapply
+$(STAMP_DIR)/patchapply: $(STAMP_DIR)/source.build $(STAMP_DIR)
+	$(SHELL) debian/scripts/lib patch.apply
+	touch $@
+	rm -f $(STAMP_DIR)/patchunapply
+
+patchunapply: $(STAMP_DIR)/patchunapply
+$(STAMP_DIR)/patchunapply: $(STAMP_DIR)/source.build $(STAMP_DIR)
+	$(SHELL) debian/scripts/lib patch.unapply
+	touch $@
+	rm -f $(STAMP_DIR)/patchapply
+
+.export: SOURCE_TREE
+
+#
+# The rules that really do the work all start with $(STAMPDIR)
+# This little trick allows us to use stamp files to keep us from
+# having to rerun long targets over and over.  It also puts
+# all stamp files in one place, for easy cleaning.
+#
+# If a stampdir rule depends on something else, be sure it is
+# another stampdir rule.  Depending on base rule won't work.
+#
+
+source.build: $(STAMP_DIR)/source.build
+STAMP_DIR_TARGETS+= $(STAMP_DIR)/source.build
+$(STAMP_DIR)/source.build: $(STAMP_DIR)/source.unpack $(STAMP_DIR)/source.patch $(STAMP_DIR)
+	touch $@
+
+source.make: $(STAMP_DIR)/source.make
+STAMP_DIR_TARGETS+= $(STAMP_DIR)/source.make
+$(STAMP_DIR)/source.make: $(STAMP_DIR)/source.build $(STAMP_DIR)/patchapply $(STAMP_DIR)
+	touch $@
+
+source.unpack: $(STAMP_DIR)/source.unpack
+STAMP_DIR_TARGETS+= $(STAMP_DIR)/source.unpack
+$(STAMP_DIR)/source.unpack: $(STAMP_DIR)
+	$(SHELL) debian/scripts/source.unpack
+	touch $@
+
+source.patch: $(STAMP_DIR)/source.patch
+STAMP_DIR_TARGETS+= $(STAMP_DIR)/source.patch
+$(STAMP_DIR)/source.patch: $(STAMP_DIR)/source.unpack $(STAMP_DIR)/fix.source.patch $(STAMP_DIR)
+	$(SHELL) debian/scripts/lib source.patch
+	touch $@
+
+fix.source.patch: $(STAMP_DIR)/fix.source.patch
+STAMP_DIR_TARGETS+= $(STAMP_DIR)/fix.source.patch
+$(STAMP_DIR)/fix.source.patch: $(STAMP_DIR)
+	$(SHELL) debian/scripts/lib fix.source.patch
+	touch $@
+
+unfix.source.patch: $(STAMP_DIR)/unfix.source.patch
+STAMP_DIR_TARGETS+= $(STAMP_DIR)/unfix.source.patch
+$(STAMP_DIR)/unfix.source.patch: $(STAMP_DIR)
+	$(SHELL) debian/scripts/lib unfix.source.patch
+	touch $@
+
+source.compile: $(STAMP_DIR)/source.compile
+STAMP_DIR_TARGETS+= $(STAMP_DIR)/source.compile
+$(STAMP_DIR)/source.compile: $(STAMP_DIR)/source.make $(STAMP_DIR)
+	$(MAKE) -C $(BUILD_TREE) $(BUILD_TARGET)
+	touch $@
+
+source.command:
+	(cd $(BUILD_TREE); $(SOURCE_CMD))
+
+DIR_TARGETS+=$(STAMP_DIR)
+$(STAMP_DIR_TARGETS): $(STAMP_DIR)
+
+$(DIR_TARGETS)/:
+	mkdir -p $@
+
+source.clean: unfix.source.patch
+	$(SHELL) debian/scripts/lib source.clean
+	rm -f $(STAMP_DIR_TARGETS)
+	rm -rf $(STAMP_DIR)
+	$(MAKE) -C debian/scripts clean
--- gtk+2.0-2.0.2.orig/debian/rules
+++ gtk+2.0-2.0.2/debian/rules
@@ -0,0 +1,201 @@
+#!/usr/bin/make -f
+# Sample debian/rules that uses debhelper.
+# GNU copyright 1997 to 1999 by Joey Hess.
+
+include debian/scripts/vars
+BUILD_DIR=$(SOURCE_DIR)/$(TAR_DIR)
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+# This is the debhelper compatibility version to use.
+export DH_COMPAT=3
+
+# These are used for cross-compiling and for saving the configure script
+# from having to guess our platform (since we know it already)
+DEB_HOST_GNU_TYPE	?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE	?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+
+
+ifneq (,$(findstring debug,$(DEB_BUILD_OPTIONS)))
+	CFLAGS += -g
+endif
+ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
+	INSTALL_PROGRAM += -s
+endif
+
+##
+version=$(shell dpkg-parsechangelog | grep '^Version: ' | sed -e 's/^Version: //' -e 's/-[A-Za-z0-9\.]*$$//g' -e 's/+[A-Za-z0-9\.]*$$//g')
+major=$(shell echo ${version} | sed -e 's/\(^[0-9]*\)\.[0-9]*\.[0-9]*$$/\1/')
+minor=$(shell echo ${version} | sed -e 's/^[0-9]*\.\([0-9]*\)\.[0-9]*$$/\1/')
+rel=$(shell echo ${version} | sed -e 's/^[0-9]*\.[0-9]*\.\([0-9]*\)$$/\1/')
+shortver=$(major).$(minor)
+soname=0
+modver=$(major).$(minor).0
+libpath=$(CURDIR)/$(BUILD_DIR)/gdk-pixbuf/.libs:$(CURDIR)/$(BUILD_DIR)/gdk/.libs:$(CURDIR)/$(BUILD_DIR)/gtk/.libs
+
+
+debian/control:
+	dh_testdir
+
+	sed -e 's/@SONAME@/${soname}/g' -e 's/@VERSION@/${version}/g' $@.in > $@
+
+configure: $(STAMP_DIR)/configure-stamp
+$(STAMP_DIR)/configure-stamp:
+	dh_testdir
+
+	$(MAKE) -f debian/sys-build.mk source.make
+
+	-test -r /usr/share/misc/config.sub && \
+	   cp -f /usr/share/misc/config.sub $(BUILD_DIR)/config.sub
+	-test -r /usr/share/misc/config.guess && \
+	   cp -f /usr/share/misc/config.guess $(BUILD_DIR)/config.guess
+
+	# When install the shared libraries, don't relink it.
+	cp debian/fixed-ltmain.sh $(BUILD_DIR)/ltmain.sh
+
+	# Add here commands to configure the package.
+	cd $(BUILD_DIR) && \
+	./configure	--host=$(DEB_HOST_GNU_TYPE) \
+			--build=$(DEB_BUILD_GNU_TYPE) \
+			--prefix=/usr \
+			--mandir=\$${prefix}/share/man \
+			--infodir=\$${prefix}/share/info \
+			--sysconfdir=/etc \
+			--with-html-dir=\$${prefix}/share/doc/libgtk$(shortver)-doc
+
+	cd $(BUILD_DIR) && \
+	sed < libtool > libtool-2 \
+	 -e 's/^hardcode_libdir_flag_spec.*$$/hardcode_libdir_flag_spec=" -D__LIBTOOL_IS_A_FOOL__ "/' \
+	 -e '/^archive_cmds="/s/"$$/ \\$$deplibs"/' && \
+	mv libtool-2 libtool
+
+	touch $@
+
+build: debian/control configure $(STAMP_DIR)/build-stamp
+$(STAMP_DIR)/build-stamp:
+	dh_testdir
+
+	# Add here commands to compile the package.
+	$(MAKE) -C $(BUILD_DIR) \
+		LD_LIBRARY_PATH=$(libpath):$(LD_LIBRARY_PATH)
+
+	touch $@
+
+clean: debian/control
+	dh_testdir
+	dh_testroot
+
+	# Add here commands to clean up after the build process.
+	$(MAKE) -f debian/sys-build.mk source.clean
+	-rm -rf $(STAMP_DIR)
+
+	dh_clean
+
+install: build
+	dh_testdir
+	dh_testroot
+	dh_clean -k
+	dh_installdirs
+
+	# Add here commands to install the package into debian/tmp
+	$(MAKE) -C $(BUILD_DIR) install \
+		DESTDIR=$(CURDIR)/debian/libgtk$(shortver)-$(soname)
+
+	# generating debian files from .in
+	for f in `find debian/ -name "[^c]*.in"`; do \
+		sed -e "s/@VERSION@/${version}/g" -e "s/@MODVER@/${modver}/g" $$f > `echo $$f | sed -e "s/\.in//"`; \
+	done
+
+	# for -doc
+	cp -a $(BUILD_DIR)/docs/faq/html debian/libgtk$(shortver)-doc/usr/share/doc/libgtk$(shortver)-doc/gtk-faq/
+	cp -a $(BUILD_DIR)/docs/tutorial/html debian/libgtk$(shortver)-doc/usr/share/doc/libgtk$(shortver)-doc/gtk-tutorial/
+	cp -ar $(BUILD_DIR)/docs/tutorial/images debian/libgtk$(shortver)-doc/usr/share/doc/libgtk$(shortver)-doc/gtk-tutorial/
+	cp $(BUILD_DIR)/docs/*.txt debian/libgtk$(shortver)-doc/usr/share/doc/libgtk$(shortver)-doc
+
+	# for -dbg
+	mkdir -p $(CURDIR)/debian/libgtk$(shortver)-$(soname)/usr/lib/debug
+	for l in `find $(CURDIR)/debian/libgtk$(shortver)-$(soname)/usr/lib -name 'lib*.so*'`; do \
+		cp -vdf $$l \
+			$(CURDIR)/debian/libgtk$(shortver)-$(soname)/usr/lib/debug; \
+	done
+
+	# debian files
+	install -m 755 $(CURDIR)/debian/update-gtk-immodules \
+		       $(CURDIR)/debian/libgtk$(shortver)-common/usr/sbin/
+
+	# don't need executable attribute
+	for f in `find $(CURDIR)/debian/libgtk$(shortver)-$(soname)/usr/share/themes -type f`; do \
+		chmod a-x $$f; \
+	done
+
+	dh_movefiles --sourcedir=debian/libgtk$(shortver)-$(soname)
+	-find $(CURDIR)/debian/ -type d -empty | xargs rmdir -p 2>&1 > /dev/null
+
+	# don't delete /etc/gtk-2.0
+	install -d $(CURDIR)/debian/libgtk$(shortver)-common/etc/gtk-$(shortver)
+
+# Build architecture-independent files here.
+binary-indep: build install
+	dh_testdir -i
+	dh_testroot -i
+
+	dh_installdocs -i
+	dh_installexamples -i
+	dh_installinfo -i
+	dh_installchangelogs -i $(BUILD_DIR)/ChangeLog
+	dh_compress -i
+	dh_fixperms -i
+	dh_installdeb -i
+	dh_gencontrol -i
+	dh_md5sums -i
+	dh_builddeb -i
+
+# Build architecture-dependent files here.
+binary-arch: build install
+	dh_testdir -a
+	dh_testroot -a
+
+#	dh_installdebconf	
+	dh_installdocs -a
+
+	rm -rf $(CURDIR)/debian/libgtk$(shortver)-dbg/usr/share/doc/libgtk$(shortver)-dbg
+	rm -rf $(CURDIR)/debian/libgtk$(shortver)-dev/usr/share/doc/libgtk$(shortver)-dev
+	rm -rf $(CURDIR)/debian/libgtk$(shortver)-common/usr/share/doc/libgtk$(shortver)-common
+	rm -rf $(CURDIR)/debian/libgtk-common/usr/share/doc/libgtk-common
+
+	dh_link -plibgtk$(shortver)-dbg \
+		usr/share/doc/libgtk$(shortver)-$(soname) \
+		usr/share/doc/libgtk$(shortver)-dbg
+	dh_link -plibgtk$(shortver)-dev \
+		usr/share/doc/libgtk$(shortver)-$(soname) \
+		usr/share/doc/libgtk$(shortver)-dev
+	dh_link -plibgtk$(shortver)-common \
+		usr/share/doc/libgtk$(shortver)-$(soname) \
+		usr/share/doc/libgtk$(shortver)-common
+	dh_link -plibgtk-common \
+		usr/share/doc/libgtk$(shortver)-common \
+		usr/share/doc/libgtk-common
+
+	dh_installexamples -a
+
+	rm $(CURDIR)/debian/gtk$(shortver)-examples/usr/share/doc/gtk$(shortver)-examples/examples/find-examples.sh
+
+	dh_installman -a
+	dh_installinfo -a
+	dh_undocumented -a
+	dh_installchangelogs -a $(BUILD_DIR)/ChangeLog
+	dh_strip -a -Nlibgtk$(shortver)-dbg
+	dh_compress -a
+	dh_fixperms -a
+	dh_makeshlibs -a -Nlibgtk$(shortver)-dbg
+	dh_makeshlibs -X usr/lib/gtk-$(shortver) -plibgtk$(shortver)-$(soname) -V "libgtk${shortver}-${soname} (>= ${version})"
+	dh_installdeb -a
+	dh_shlibdeps -l$(libpath) -a
+	cat debian/*/DEBIAN/shlibs > debian/shlibs.local
+	dh_gencontrol -a
+	dh_md5sums -a
+	dh_builddeb -a
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install configure debian/control
--- gtk+2.0-2.0.2.orig/debian/sources
+++ gtk+2.0-2.0.2/debian/sources
@@ -0,0 +1 @@
+upstream tar ../gtk+-2.0.2.tar.gz
--- gtk+2.0-2.0.2.orig/debian/changelog
+++ gtk+2.0-2.0.2/debian/changelog
@@ -0,0 +1,62 @@
+gtk+2.0 (2.0.2-5woody1) testing; urgency=low
+
+  * backported to fix some issue on woody.
+  * debian/patches/000_gtk+2.0-2.0.2-bigendian.patch: applied to fix a problem
+    for big endian machines. (related Bug#145285)
+  * debian/control:
+    - add libtiff3g-dev, libpng2-dev and libjpeg62-dev to Depends for -dev.
+      (closes: Bug#147420)
+    - debian/control: fix typo (related Bug#150147)
+  * debian/libgtk2.0-doc.doc-base.{gdk,gdk-pixbuf,gtk,gtk-faq,gtk-tutorial}:
+    add a new line before Format: (related Bug#149548, Bug#150043)
+
+ -- Akira TAGOH <tagoh@debian.org>  Tue,  2 Jul 2002 22:21:19 +0900
+
+gtk+2.0 (2.0.2-2) unstable; urgency=low
+
+  * debian/libgtk2.0-doc.doc-base.{gtk-faq,gtk-tutorial}:
+    Grr, fix again... (closes: Bug#141069)
+  * debian/scripts/vars.build: fix bashism.
+
+ -- Akira TAGOH <tagoh@debian.org>  Sat,  6 Apr 2002 04:26:14 +0900
+
+gtk+2.0 (2.0.2-1) unstable; urgency=low
+
+  * New upstream release.
+    - this release has bug fix only.
+  * debian/control: forgot to update versioned dependency for -dev.
+  * debian/libgtk2.0-doc.doc-base.gtk-faq,
+    debian/libgtk2.0-doc.doc-base.gtk-tutorial:
+    fix wrong index. (closes: Bug#141069)
+
+ -- Akira TAGOH <tagoh@debian.org>  Thu,  4 Apr 2002 02:49:49 +0900
+
+gtk+2.0 (2.0.1-1) unstable; urgency=low
+
+  * New upstream release.
+  * debian/update-gtk-immodules: check the immodules directory.
+
+ -- Akira TAGOH <tagoh@debian.org>  Sun, 31 Mar 2002 00:59:03 +0900
+
+gtk+2.0 (2.0.0-3) unstable; urgency=low
+
+  * debian/rules: removed regenerate shlibs. all packages no longer needs to
+    depend on -common.
+
+ -- Akira TAGOH <tagoh@debian.org>  Sat, 16 Mar 2002 21:51:08 +0900
+
+gtk+2.0 (2.0.0-2) unstable; urgency=low
+
+  * debian/control: changed Build-Depends to libpango1.0-dev (>= 1.0.0-3)
+  * debian/{control,rules}: add libgtk-common as dummy package for upgrading.
+  * debian/rules: fix the missing directory.
+  * debian/update-gtk-immodules: fix file attribute for gtk.immodules.
+
+ -- Akira TAGOH <tagoh@debian.org>  Sat, 16 Mar 2002 04:34:39 +0900
+
+gtk+2.0 (2.0.0-1) unstable; urgency=low
+
+  * Initial Release.
+
+ -- Akira TAGOH <tagoh@debian.org>  Wed, 13 Mar 2002 00:07:25 +0900
+
--- gtk+2.0-2.0.2.orig/debian/control.in
+++ gtk+2.0-2.0.2/debian/control.in
@@ -0,0 +1,110 @@
+Source: gtk+2.0
+Section: libs
+Priority: optional
+Maintainer: Akira TAGOH <tagoh@debian.org>
+Build-Depends: debhelper (>> 3.0.0), gettext, pkg-config, libglib2.0-dev (>= 2.0.1), libpango1.0-dev (>= 1.0.1), libatk1.0-dev (>= 1.0.1), xlibs-dev, libtiff3g-dev, libjpeg62-dev, libpng2-dev, docbook-utils, linuxdoc-tools-text
+Standards-Version: 3.5.2
+
+Package: libgtk2.0-@SONAME@
+Section: libs
+Architecture: any
+Depends: libgtk-common, ${shlibs:Depends}
+Description: The GTK+ graphical user interface library
+ The GTK+ is a multi-platform toolkit for creating graphical user
+ interfaces. Offering a complete set of widgets, the GTK+ is suitable
+ for projects ranging from small one-off tools to complete application
+ suites.
+ .
+ This package contains the shared libraries.
+
+Package: libgtk-common
+Section: misc
+Architecture: any
+Depends: libgtk2.0-common (= ${Source-Version})
+Description: Dummy package for upgrading libgtkx.x-common
+ The GTK+ is a multi-platform toolkit for creating graphical user
+ interfaces. Offering a complete set of widgets, the GTK+ is suitable
+ for projects ranging from small one-off tools to complete application
+ suites.
+ .
+ This package provides the dummy package for upgrading from old -common
+ package.
+
+Package: libgtk2.0-common
+Section: misc
+Architecture: any
+Depends: ${shlibs:Depends}
+Replaces: libgtk1.3-common
+Conflicts: libgtk1.3-common
+Description: Common files for the GTK+ graphical user interface library
+ The GTK+ is a multi-platform toolkit for creating graphical user
+ interfaces. Offering a complete set of widgets, the GTK+ is suitable
+ for projects ranging from small one-off tools to complete application
+ suites.
+ .
+ This package contains the common files which the libraries need.
+
+Package: libgtk2.0-dev
+Section: devel
+Architecture: any
+Depends: libgtk2.0-@SONAME@ (= ${Source-Version}), libc6-dev, libglib2.0-dev (>= 2.0.1), libpango1.0-dev (>= 1.0.1), libatk1.0-dev (>= 1.0.1), xlibs-dev, libtiff3g-dev, libpng2-dev, libjpeg62-dev, pkg-config
+Suggests: libgtk2.0-doc
+Replaces: libgtk1.3-dev
+Conflicts: libgtk1.3-dev
+Description: Development files for the GTK+ library.
+ The GTK+ is a multi-platform toolkit for creating graphical user
+ interfaces. Offering a complete set of widgets, the GTK+ is suitable
+ for projects ranging from small one-off tools to complete application
+ suites.
+ .
+ This package contains the header files and static libraries which is
+ needed for developing the GTK+ applications.
+
+Package: libgtk2.0-dbg
+Section: devel
+Priority: extra
+Architecture: any
+Depends: libgtk2.0-@SONAME@ (= ${Source-Version})
+Description: The GTK+ libraries and debugging symbols
+ The GTK+ is a multi-platform toolkit for creating graphical user
+ interfaces. Offering a complete set of widgets, the GTK+ is suitable
+ for projects ranging from small one-off tools to complete application
+ suites.
+ .
+ This package contains unstripped shared libraries. it is provided
+ primarily to provide a backtrace with names in a debugger, this makes
+ it somewhat easier to interpret core dumps. The libraries are installed
+ in /usr/lib/debug and can be used by placing that directory in
+ LD_LIBRARY_PATH.
+ Most people will not need this package.
+
+Package: libgtk2.0-doc
+Section: doc
+Architecture: all
+Depends: lynx | www-browser
+Replaces: libgtk1.3-doc
+Conflicts: libgtk1.3-doc
+Description: Documentation for the GTK+ graphical user interface library
+ The GTK+ is a multi-platform toolkit for creating graphical user
+ interfaces. Offering a complete set of widgets, the GTK+ is suitable
+ for projects ranging from small one-off tools to complete application
+ suites.
+ .
+ This package contains the HTML documentation for the GTK+ library
+ in /usr/share/doc/libgtk2.0-doc/ .
+
+Package: gtk2.0-examples
+Section: x11
+Priority: extra
+Architecture: any
+Depends: ${shlibs:Depends}
+Replaces: libgtk1.3-dev
+Description: Examples files for the GTK+ 2.0
+ The GTK+ is a multi-platform toolkit for creating graphical user
+ interfaces. Offering a complete set of widgets, the GTK+ is suitable
+ for projects ranging from small one-off tools to complete application
+ suites.
+ .
+ This package contains the examples files and a demonstration program
+ for the GTK+-2.0.
+
--- gtk+2.0-2.0.2.orig/debian/control
+++ gtk+2.0-2.0.2/debian/control
@@ -0,0 +1,110 @@
+Source: gtk+2.0
+Section: libs
+Priority: optional
+Maintainer: Akira TAGOH <tagoh@debian.org>
+Build-Depends: debhelper (>> 3.0.0), gettext, pkg-config, libglib2.0-dev (>= 2.0.1), libpango1.0-dev (>= 1.0.1), libatk1.0-dev (>= 1.0.1), xlibs-dev, libtiff3g-dev, libjpeg62-dev, libpng2-dev, docbook-utils, linuxdoc-tools-text
+Standards-Version: 3.5.2
+
+Package: libgtk2.0-0
+Section: libs
+Architecture: any
+Depends: libgtk-common, ${shlibs:Depends}
+Description: The GTK+ graphical user interface library
+ The GTK+ is a multi-platform toolkit for creating graphical user
+ interfaces. Offering a complete set of widgets, the GTK+ is suitable
+ for projects ranging from small one-off tools to complete application
+ suites.
+ .
+ This package contains the shared libraries.
+
+Package: libgtk-common
+Section: misc
+Architecture: any
+Depends: libgtk2.0-common (= ${Source-Version})
+Description: Dummy package for upgrading libgtkx.x-common
+ The GTK+ is a multi-platform toolkit for creating graphical user
+ interfaces. Offering a complete set of widgets, the GTK+ is suitable
+ for projects ranging from small one-off tools to complete application
+ suites.
+ .
+ This package provides the dummy package for upgrading from old -common
+ package.
+
+Package: libgtk2.0-common
+Section: misc
+Architecture: any
+Depends: ${shlibs:Depends}
+Replaces: libgtk1.3-common
+Conflicts: libgtk1.3-common
+Description: Common files for the GTK+ graphical user interface library
+ The GTK+ is a multi-platform toolkit for creating graphical user
+ interfaces. Offering a complete set of widgets, the GTK+ is suitable
+ for projects ranging from small one-off tools to complete application
+ suites.
+ .
+ This package contains the common files which the libraries need.
+
+Package: libgtk2.0-dev
+Section: devel
+Architecture: any
+Depends: libgtk2.0-0 (= ${Source-Version}), libc6-dev, libglib2.0-dev (>= 2.0.1), libpango1.0-dev (>= 1.0.1), libatk1.0-dev (>= 1.0.1), xlibs-dev, libtiff3g-dev, libpng2-dev, libjpeg62-dev, pkg-config
+Suggests: libgtk2.0-doc
+Replaces: libgtk1.3-dev
+Conflicts: libgtk1.3-dev
+Description: Development files for the GTK+ library.
+ The GTK+ is a multi-platform toolkit for creating graphical user
+ interfaces. Offering a complete set of widgets, the GTK+ is suitable
+ for projects ranging from small one-off tools to complete application
+ suites.
+ .
+ This package contains the header files and static libraries which is
+ needed for developing the GTK+ applications.
+
+Package: libgtk2.0-dbg
+Section: devel
+Priority: extra
+Architecture: any
+Depends: libgtk2.0-0 (= ${Source-Version})
+Description: The GTK+ libraries and debugging symbols
+ The GTK+ is a multi-platform toolkit for creating graphical user
+ interfaces. Offering a complete set of widgets, the GTK+ is suitable
+ for projects ranging from small one-off tools to complete application
+ suites.
+ .
+ This package contains unstripped shared libraries. it is provided
+ primarily to provide a backtrace with names in a debugger, this makes
+ it somewhat easier to interpret core dumps. The libraries are installed
+ in /usr/lib/debug and can be used by placing that directory in
+ LD_LIBRARY_PATH.
+ Most people will not need this package.
+
+Package: libgtk2.0-doc
+Section: doc
+Architecture: all
+Depends: lynx | www-browser
+Replaces: libgtk1.3-doc
+Conflicts: libgtk1.3-doc
+Description: Documentation for the GTK+ graphical user interface library
+ The GTK+ is a multi-platform toolkit for creating graphical user
+ interfaces. Offering a complete set of widgets, the GTK+ is suitable
+ for projects ranging from small one-off tools to complete application
+ suites.
+ .
+ This package contains the HTML documentation for the GTK+ library
+ in /usr/share/doc/libgtk2.0-doc/ .
+
+Package: gtk2.0-examples
+Section: x11
+Priority: extra
+Architecture: any
+Depends: ${shlibs:Depends}
+Replaces: libgtk1.3-dev
+Description: Examples files for the GTK+ 2.0
+ The GTK+ is a multi-platform toolkit for creating graphical user
+ interfaces. Offering a complete set of widgets, the GTK+ is suitable
+ for projects ranging from small one-off tools to complete application
+ suites.
+ .
+ This package contains the examples files and a demonstration program
+ for the GTK+-2.0.
+
--- gtk+2.0-2.0.2.orig/debian/copyright
+++ gtk+2.0-2.0.2/debian/copyright
@@ -0,0 +1,53 @@
+This package was debianized by Akira TAGOH <tagoh@debian.org> on
+Wed, 13 Mar 2002 00:07:25 +0900.
+
+It was downloaded from ftp://ftp.gtk.org/ .
+
+Original Authors
+----------------
+Peter Mattis      <petm@xcf.berkeley.edu>
+Spencer Kimball   <spencer@xcf.berkeley.edu>
+Josh MacDonald    <jmacd@xcf.berkeley.edu>
+
+Please do not mail the original authors asking questions about this 
+version of GTK+.
+
+The GTK+ Team (in alphabetical order)
+-------------------------------------
+Shawn T. Amundson <amundson@gtk.org>
+Jerome Bolliet    <bolliet@gtk.org>
+Damon Chaplin     <damon@gtk.org>
+Tony Gale         <gale@gtk.org>
+Jeff Garzik       <jgarzik@gtk.org>
+Lars Hamann       <lars@gtk.org>
+Raja R Harinath   <harinath@gtk.org>
+Carsten Haitzler  <raster@gtk.org>
+Tim Janik         <timj@gtk.org>
+Stefan Jeske      <stefan@gtk.org>
+Elliot Lee        <sopwith@gtk.org>
+Raph Levien       <raph@gtk.org>
+Ian Main          <imain@gtk.org>
+Federico Mena     <quartic@gtk.org>
+Paolo Molaro      <lupus@gtk.org>
+Jay Painter       <jpaint@gtk.org>
+Manish Singh      <manish@gtk.org>
+Owen Taylor       <otaylor@gtk.org>
+
+Copyright:
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the
+ Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA.
+
+ See /usr/share/common-licenses/LGPL-2 on your debian system.
+
--- gtk+2.0-2.0.2.orig/debian/libgtk2.0-common.files
+++ gtk+2.0-2.0.2/debian/libgtk2.0-common.files
@@ -0,0 +1,4 @@
+usr/bin/gtk-query-immodules-2.0
+usr/share/locale/*
+usr/share/themes/*
+etc/gtk-2.0/*
--- gtk+2.0-2.0.2.orig/debian/gtk2.0-examples.examples
+++ gtk+2.0-2.0.2/debian/gtk2.0-examples.examples
@@ -0,0 +1 @@
+build-tree/gtk+-2.0.2/examples/*
--- gtk+2.0-2.0.2.orig/debian/fixed-ltmain.sh
+++ gtk+2.0-2.0.2/debian/fixed-ltmain.sh
@@ -0,0 +1,4997 @@
+# ltmain.sh - Provide generalized library-building support services.
+# NOTE: Changing this file will not affect anything until you rerun configure.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Check that we have a working $echo.
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell, and then maybe $echo will work.
+  exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit 0
+fi
+
+# The name of this program.
+progname=`$echo "$0" | sed 's%^.*/%%'`
+modename="$progname"
+
+# Constants.
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=1.4
+TIMESTAMP=" (1.922 2001/04/25 00:05:37)"
+
+default_mode=
+help="Try \`$progname --help' for more information."
+magic="%%%MAGIC variable%%%"
+mkdir="mkdir"
+mv="mv -f"
+rm="rm -f"
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+SP2NL='tr \040 \012'
+NL2SP='tr \015\012 \040\040'
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+# We save the old values to restore during execute mode.
+if test "${LC_ALL+set}" = set; then
+  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
+fi
+if test "${LANG+set}" = set; then
+  save_LANG="$LANG"; LANG=C; export LANG
+fi
+
+if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+  echo "$modename: not configured to build any kind of library" 1>&2
+  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit 1
+fi
+
+# Global variables.
+mode=$default_mode
+nonopt=
+prev=
+prevopt=
+run=
+show="$echo"
+show_help=
+execute_dlfiles=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+
+# Parse our command line options once, thoroughly.
+while test $# -gt 0
+do
+  arg="$1"
+  shift
+
+  case $arg in
+  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$prev"; then
+    case $prev in
+    execute_dlfiles)
+      execute_dlfiles="$execute_dlfiles $arg"
+      ;;
+    *)
+      eval "$prev=\$arg"
+      ;;
+    esac
+
+    prev=
+    prevopt=
+    continue
+  fi
+
+  # Have we seen a non-optional argument yet?
+  case $arg in
+  --help)
+    show_help=yes
+    ;;
+
+  --version)
+    echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+    exit 0
+    ;;
+
+  --config)
+    sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
+    exit 0
+    ;;
+
+  --debug)
+    echo "$progname: enabling shell trace mode"
+    set -x
+    ;;
+
+  --dry-run | -n)
+    run=:
+    ;;
+
+  --features)
+    echo "host: $host"
+    if test "$build_libtool_libs" = yes; then
+      echo "enable shared libraries"
+    else
+      echo "disable shared libraries"
+    fi
+    if test "$build_old_libs" = yes; then
+      echo "enable static libraries"
+    else
+      echo "disable static libraries"
+    fi
+    exit 0
+    ;;
+
+  --finish) mode="finish" ;;
+
+  --mode) prevopt="--mode" prev=mode ;;
+  --mode=*) mode="$optarg" ;;
+
+  --quiet | --silent)
+    show=:
+    ;;
+
+  -dlopen)
+    prevopt="-dlopen"
+    prev=execute_dlfiles
+    ;;
+
+  -*)
+    $echo "$modename: unrecognized option \`$arg'" 1>&2
+    $echo "$help" 1>&2
+    exit 1
+    ;;
+
+  *)
+    nonopt="$arg"
+    break
+    ;;
+  esac
+done
+
+if test -n "$prevopt"; then
+  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+  $echo "$help" 1>&2
+  exit 1
+fi
+
+if test -z "$show_help"; then
+
+  # Infer the operation mode.
+  if test -z "$mode"; then
+    case $nonopt in
+    *cc | *++ | gcc* | *-gcc*)
+      mode=link
+      for arg
+      do
+	case $arg in
+	-c)
+	   mode=compile
+	   break
+	   ;;
+	esac
+      done
+      ;;
+    *db | *dbx | *strace | *truss)
+      mode=execute
+      ;;
+    *install*|cp|mv)
+      mode=install
+      ;;
+    *rm)
+      mode=uninstall
+      ;;
+    *)
+      # If we have no mode, but dlfiles were specified, then do execute mode.
+      test -n "$execute_dlfiles" && mode=execute
+
+      # Just use the default operation mode.
+      if test -z "$mode"; then
+	if test -n "$nonopt"; then
+	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
+	else
+	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
+	fi
+      fi
+      ;;
+    esac
+  fi
+
+  # Only execute mode is allowed to have -dlopen flags.
+  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+    $echo "$help" 1>&2
+    exit 1
+  fi
+
+  # Change the help message to a mode-specific one.
+  generic_help="$help"
+  help="Try \`$modename --help --mode=$mode' for more information."
+
+  # These modes are in order of execution frequency so that they run quickly.
+  case $mode in
+  # libtool compile mode
+  compile)
+    modename="$modename: compile"
+    # Get the compilation command and the source file.
+    base_compile=
+    prev=
+    lastarg=
+    srcfile="$nonopt"
+    suppress_output=
+
+    user_target=no
+    for arg
+    do
+      case $prev in
+      "") ;;
+      xcompiler)
+	# Aesthetically quote the previous argument.
+	prev=
+	lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+
+	case $arg in
+	# Double-quote args containing other shell metacharacters.
+	# Many Bourne shells cannot handle close brackets correctly
+	# in scan sets, so we specify it separately.
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+
+	# Add the previous argument to base_compile.
+	if test -z "$base_compile"; then
+	  base_compile="$lastarg"
+	else
+	  base_compile="$base_compile $lastarg"
+	fi
+	continue
+	;;
+      esac
+
+      # Accept any command-line options.
+      case $arg in
+      -o)
+	if test "$user_target" != "no"; then
+	  $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+	  exit 1
+	fi
+	user_target=next
+	;;
+
+      -static)
+	build_old_libs=yes
+	continue
+	;;
+
+      -prefer-pic)
+	pic_mode=yes
+	continue
+	;;
+
+      -prefer-non-pic)
+	pic_mode=no
+	continue
+	;;
+
+      -Xcompiler)
+	prev=xcompiler
+	continue
+	;;
+
+      -Wc,*)
+	args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+	lastarg=
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=','
+	for arg in $args; do
+	  IFS="$save_ifs"
+
+	  # Double-quote args containing other shell metacharacters.
+	  # Many Bourne shells cannot handle close brackets correctly
+	  # in scan sets, so we specify it separately.
+	  case $arg in
+	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	    arg="\"$arg\""
+	    ;;
+	  esac
+	  lastarg="$lastarg $arg"
+	done
+	IFS="$save_ifs"
+	lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
+
+	# Add the arguments to base_compile.
+	if test -z "$base_compile"; then
+	  base_compile="$lastarg"
+	else
+	  base_compile="$base_compile $lastarg"
+	fi
+	continue
+	;;
+      esac
+
+      case $user_target in
+      next)
+	# The next one is the -o target name
+	user_target=yes
+	continue
+	;;
+      yes)
+	# We got the output file
+	user_target=set
+	libobj="$arg"
+	continue
+	;;
+      esac
+
+      # Accept the current argument as the source file.
+      lastarg="$srcfile"
+      srcfile="$arg"
+
+      # Aesthetically quote the previous argument.
+
+      # Backslashify any backslashes, double quotes, and dollar signs.
+      # These are the only characters that are still specially
+      # interpreted inside of double-quoted scrings.
+      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+
+      # Double-quote args containing other shell metacharacters.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      case $lastarg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	lastarg="\"$lastarg\""
+	;;
+      esac
+
+      # Add the previous argument to base_compile.
+      if test -z "$base_compile"; then
+	base_compile="$lastarg"
+      else
+	base_compile="$base_compile $lastarg"
+      fi
+    done
+
+    case $user_target in
+    set)
+      ;;
+    no)
+      # Get the name of the library object.
+      libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+      ;;
+    *)
+      $echo "$modename: you must specify a target with \`-o'" 1>&2
+      exit 1
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    xform='[cCFSfmso]'
+    case $libobj in
+    *.ada) xform=ada ;;
+    *.adb) xform=adb ;;
+    *.ads) xform=ads ;;
+    *.asm) xform=asm ;;
+    *.c++) xform=c++ ;;
+    *.cc) xform=cc ;;
+    *.cpp) xform=cpp ;;
+    *.cxx) xform=cxx ;;
+    *.f90) xform=f90 ;;
+    *.for) xform=for ;;
+    esac
+
+    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+
+    case $libobj in
+    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+    *)
+      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+      exit 1
+      ;;
+    esac
+
+    if test -z "$base_compile"; then
+      $echo "$modename: you must specify a compilation command" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    # Delete any leftover library objects.
+    if test "$build_old_libs" = yes; then
+      removelist="$obj $libobj"
+    else
+      removelist="$libobj"
+    fi
+
+    $run $rm $removelist
+    trap "$run $rm $removelist; exit 1" 1 2 15
+
+    # On Cygwin there's no "real" PIC flag so we must build both object types
+    case $host_os in
+    cygwin* | mingw* | pw32* | os2*)
+      pic_mode=default
+      ;;
+    esac
+    if test $pic_mode = no && test "$deplibs_check_method" != pass_all; then
+      # non-PIC code in shared libraries is not supported
+      pic_mode=default
+    fi
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test "$compiler_c_o" = no; then
+      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+      lockfile="$output_obj.lock"
+      removelist="$removelist $output_obj $lockfile"
+      trap "$run $rm $removelist; exit 1" 1 2 15
+    else
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test "$need_locks" = yes; then
+      until $run ln "$0" "$lockfile" 2>/dev/null; do
+	$show "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    elif test "$need_locks" = warn; then
+      if test -f "$lockfile"; then
+	echo "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit 1
+      fi
+      echo $srcfile > "$lockfile"
+    fi
+
+    if test -n "$fix_srcfile_path"; then
+      eval srcfile=\"$fix_srcfile_path\"
+    fi
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test "$build_libtool_libs" = yes; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      if test "$pic_mode" != no; then
+	# All platforms use -DPIC, to notify preprocessed assembler code.
+	command="$base_compile $srcfile $pic_flag -DPIC"
+      else
+	# Don't build PIC code
+	command="$base_compile $srcfile"
+      fi
+      if test "$build_old_libs" = yes; then
+	lo_libobj="$libobj"
+	dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
+	if test "X$dir" = "X$libobj"; then
+	  dir="$objdir"
+	else
+	  dir="$dir/$objdir"
+	fi
+	libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+
+	if test -d "$dir"; then
+	  $show "$rm $libobj"
+	  $run $rm $libobj
+	else
+	  $show "$mkdir $dir"
+	  $run $mkdir $dir
+	  status=$?
+	  if test $status -ne 0 && test ! -d $dir; then
+	    exit $status
+	  fi
+	fi
+      fi
+      if test "$compiler_o_lo" = yes; then
+	output_obj="$libobj"
+	command="$command -o $output_obj"
+      elif test "$compiler_c_o" = yes; then
+	output_obj="$obj"
+	command="$command -o $output_obj"
+      fi
+
+      $run $rm "$output_obj"
+      $show "$command"
+      if $run eval "$command"; then :
+      else
+	test -n "$output_obj" && $run $rm $removelist
+	exit 1
+      fi
+
+      if test "$need_locks" = warn &&
+	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+	echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit 1
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test x"$output_obj" != x"$libobj"; then
+	$show "$mv $output_obj $libobj"
+	if $run $mv $output_obj $libobj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # If we have no pic_flag, then copy the object into place and finish.
+      if (test -z "$pic_flag" || test "$pic_mode" != default) &&
+	 test "$build_old_libs" = yes; then
+	# Rename the .lo from within objdir to obj
+	if test -f $obj; then
+	  $show $rm $obj
+	  $run $rm $obj
+	fi
+
+	$show "$mv $libobj $obj"
+	if $run $mv $libobj $obj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+
+	xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+	if test "X$xdir" = "X$obj"; then
+	  xdir="."
+	else
+	  xdir="$xdir"
+	fi
+	baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"`
+	libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
+	# Now arrange that obj and lo_libobj become the same file
+	$show "(cd $xdir && $LN_S $baseobj $libobj)"
+	if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
+	  exit 0
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # Allow error messages only from the first compilation.
+      suppress_output=' >/dev/null 2>&1'
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test "$build_old_libs" = yes; then
+      if test "$pic_mode" != yes; then
+	# Don't build PIC code
+	command="$base_compile $srcfile"
+      else
+	# All platforms use -DPIC, to notify preprocessed assembler code.
+	command="$base_compile $srcfile $pic_flag -DPIC"
+      fi
+      if test "$compiler_c_o" = yes; then
+	command="$command -o $obj"
+	output_obj="$obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      command="$command$suppress_output"
+      $run $rm "$output_obj"
+      $show "$command"
+      if $run eval "$command"; then :
+      else
+	$run $rm $removelist
+	exit 1
+      fi
+
+      if test "$need_locks" = warn &&
+	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+	echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit 1
+      fi
+
+      # Just move the object if needed
+      if test x"$output_obj" != x"$obj"; then
+	$show "$mv $output_obj $obj"
+	if $run $mv $output_obj $obj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # Create an invalid libtool object if no PIC, so that we do not
+      # accidentally link it into a program.
+      if test "$build_libtool_libs" != yes; then
+	$show "echo timestamp > $libobj"
+	$run eval "echo timestamp > \$libobj" || exit $?
+      else
+	# Move the .lo from within objdir
+	$show "$mv $libobj $lo_libobj"
+	if $run $mv $libobj $lo_libobj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+    fi
+
+    # Unlock the critical section if it was locked
+    if test "$need_locks" != no; then
+      $run $rm "$lockfile"
+    fi
+
+    exit 0
+    ;;
+
+  # libtool link mode
+  link | relink)
+    modename="$modename: link"
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # which system we are compiling for in order to pass an extra
+      # flag for every libtool invokation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll which has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    libtool_args="$nonopt"
+    compile_command="$nonopt"
+    finalize_command="$nonopt"
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    old_deplibs=
+    compiler_flags=
+    linker_flags=
+    dllsearchpath=
+    lib_search_path=`pwd`
+    inst_prefix_dir=
+
+    avoid_version=no
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    ltlibs=
+    module=no
+    no_install=no
+    objs=
+    prefer_static_libs=no
+    preload=no
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case $arg in
+      -all-static | -static)
+	if test "X$arg" = "X-all-static"; then
+	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+	  fi
+	  if test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	else
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	fi
+	build_libtool_libs=no
+	build_old_libs=yes
+	prefer_static_libs=yes
+	break
+	;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test $# -gt 0; do
+      arg="$1"
+      shift
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
+	;;
+      *) qarg=$arg ;;
+      esac
+      libtool_args="$libtool_args $qarg"
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+	case $prev in
+	output)
+	  compile_command="$compile_command @OUTPUT@"
+	  finalize_command="$finalize_command @OUTPUT@"
+	  ;;
+	esac
+
+	case $prev in
+	dlfiles|dlprefiles)
+	  if test "$preload" = no; then
+	    # Add the symbol object into the linking commands.
+	    compile_command="$compile_command @SYMFILE@"
+	    finalize_command="$finalize_command @SYMFILE@"
+	    preload=yes
+	  fi
+	  case $arg in
+	  *.la | *.lo) ;;  # We handle these cases below.
+	  force)
+	    if test "$dlself" = no; then
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  self)
+	    if test "$prev" = dlprefiles; then
+	      dlself=yes
+	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+	      dlself=yes
+	    else
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  *)
+	    if test "$prev" = dlfiles; then
+	      dlfiles="$dlfiles $arg"
+	    else
+	      dlprefiles="$dlprefiles $arg"
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  esac
+	  ;;
+	expsyms)
+	  export_symbols="$arg"
+	  if test ! -f "$arg"; then
+	    $echo "$modename: symbol file \`$arg' does not exist"
+	    exit 1
+	  fi
+	  prev=
+	  continue
+	  ;;
+	expsyms_regex)
+	  export_symbols_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+        inst_prefix)
+	  inst_prefix_dir="$arg"
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release="-$arg"
+	  prev=
+	  continue
+	  ;;
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case $arg in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    $echo "$modename: only absolute run-paths are allowed" 1>&2
+	    exit 1
+	    ;;
+	  esac
+	  if test "$prev" = rpath; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) rpath="$rpath $arg" ;;
+	    esac
+	  else
+	    case "$xrpath " in
+	    *" $arg "*) ;;
+	    *) xrpath="$xrpath $arg" ;;
+	    esac
+	  fi
+	  prev=
+	  continue
+	  ;;
+	xcompiler)
+	  compiler_flags="$compiler_flags $qarg"
+	  prev=
+	  compile_command="$compile_command $qarg"
+	  finalize_command="$finalize_command $qarg"
+	  continue
+	  ;;
+	xlinker)
+	  linker_flags="$linker_flags $qarg"
+	  compiler_flags="$compiler_flags $wl$qarg"
+	  prev=
+	  compile_command="$compile_command $wl$qarg"
+	  finalize_command="$finalize_command $wl$qarg"
+	  continue
+	  ;;
+	*)
+	  eval "$prev=\"\$arg\""
+	  prev=
+	  continue
+	  ;;
+	esac
+      fi # test -n $prev
+
+      prevarg="$arg"
+
+      case $arg in
+      -all-static)
+	if test -n "$link_static_flag"; then
+	  compile_command="$compile_command $link_static_flag"
+	  finalize_command="$finalize_command $link_static_flag"
+	fi
+	continue
+	;;
+
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
+	continue
+	;;
+
+      -avoid-version)
+	avoid_version=yes
+	continue
+	;;
+
+      -dlopen)
+	prev=dlfiles
+	continue
+	;;
+
+      -dlpreopen)
+	prev=dlprefiles
+	continue
+	;;
+
+      -export-dynamic)
+	export_dynamic=yes
+	continue
+	;;
+
+      -export-symbols | -export-symbols-regex)
+	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	  $echo "$modename: more than one -exported-symbols argument is not allowed"
+	  exit 1
+	fi
+	if test "X$arg" = "X-export-symbols"; then
+	  prev=expsyms
+	else
+	  prev=expsyms_regex
+	fi
+	continue
+	;;
+
+      -inst-prefix-dir)
+	prev=inst_prefix
+	continue
+	;;
+
+      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+      # so, if we see these flags be careful not to treat them like -L
+      -L[A-Z][A-Z]*:*)
+	case $with_gcc/$host in
+	no/*-*-irix*)
+	  compile_command="$compile_command $arg"
+	  finalize_command="$finalize_command $arg"
+	  ;;
+	esac
+	continue
+	;;
+
+      -L*)
+	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  absdir=`cd "$dir" && pwd`
+	  if test -z "$absdir"; then
+	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+	    exit 1
+	  fi
+	  dir="$absdir"
+	  ;;
+	esac
+	case "$deplibs " in
+	*" -L$dir "*) ;;
+	*)
+	  deplibs="$deplibs -L$dir"
+	  lib_search_path="$lib_search_path $dir"
+	  ;;
+	esac
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  case :$dllsearchpath: in
+	  *":$dir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$dir";;
+	  esac
+	  ;;
+	esac
+	continue
+	;;
+
+      -l*)
+	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+	  case $host in
+	  *-*-cygwin* | *-*-pw32* | *-*-beos*)
+	    # These systems don't actually have a C or math library (as such)
+	    continue
+	    ;;
+	  *-*-mingw* | *-*-os2*)
+	    # These systems don't actually have a C library (as such)
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  esac
+	fi
+	deplibs="$deplibs $arg"
+	continue
+	;;
+
+      -module)
+	module=yes
+	continue
+	;;
+
+      -no-fast-install)
+	fast_install=no
+	continue
+	;;
+
+      -no-install)
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  # The PATH hackery in wrapper scripts is required on Windows
+	  # in order for the loader to find any dlls it needs.
+	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
+	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
+	  fast_install=no
+	  ;;
+	*) no_install=yes ;;
+	esac
+	continue
+	;;
+
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
+
+      -o) prev=output ;;
+
+      -release)
+	prev=release
+	continue
+	;;
+
+      -rpath)
+	prev=rpath
+	continue
+	;;
+
+      -R)
+	prev=xrpath
+	continue
+	;;
+
+      -R*)
+	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  $echo "$modename: only absolute run-paths are allowed" 1>&2
+	  exit 1
+	  ;;
+	esac
+	case "$xrpath " in
+	*" $dir "*) ;;
+	*) xrpath="$xrpath $dir" ;;
+	esac
+	continue
+	;;
+
+      -static)
+	# The effects of -static are defined in a previous loop.
+	# We used to do the same as -all-static on platforms that
+	# didn't have a PIC flag, but the assumption that the effects
+	# would be equivalent was wrong.  It would break on at least
+	# Digital Unix and AIX.
+	continue
+	;;
+
+      -thread-safe)
+	thread_safe=yes
+	continue
+	;;
+
+      -version-info)
+	prev=vinfo
+	continue
+	;;
+
+      -Wc,*)
+	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+	arg=
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+	  case $flag in
+	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	    flag="\"$flag\""
+	    ;;
+	  esac
+	  arg="$arg $wl$flag"
+	  compiler_flags="$compiler_flags $flag"
+	done
+	IFS="$save_ifs"
+	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+	;;
+
+      -Wl,*)
+	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
+	arg=
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+	  case $flag in
+	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	    flag="\"$flag\""
+	    ;;
+	  esac
+	  arg="$arg $wl$flag"
+	  compiler_flags="$compiler_flags $wl$flag"
+	  linker_flags="$linker_flags $flag"
+	done
+	IFS="$save_ifs"
+	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+	;;
+
+      -Xcompiler)
+	prev=xcompiler
+	continue
+	;;
+
+      -Xlinker)
+	prev=xlinker
+	continue
+	;;
+
+      # Some other compiler flag.
+      -* | +*)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case $arg in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+	;;
+
+      *.lo | *.$objext)
+	# A library or standard object.
+	if test "$prev" = dlfiles; then
+	  # This file was specified with -dlopen.
+	  if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+	    dlfiles="$dlfiles $arg"
+	    prev=
+	    continue
+	  else
+	    # If libtool objects are unsupported, then we need to preload.
+	    prev=dlprefiles
+	  fi
+	fi
+
+	if test "$prev" = dlprefiles; then
+	  # Preload the old-style object.
+	  dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
+	  prev=
+	else
+	  case $arg in
+	  *.lo) libobjs="$libobjs $arg" ;;
+	  *) objs="$objs $arg" ;;
+	  esac
+	fi
+	;;
+
+      *.$libext)
+	# An archive.
+	deplibs="$deplibs $arg"
+	old_deplibs="$old_deplibs $arg"
+	continue
+	;;
+
+      *.la)
+	# A libtool-controlled library.
+
+	if test "$prev" = dlfiles; then
+	  # This library was specified with -dlopen.
+	  dlfiles="$dlfiles $arg"
+	  prev=
+	elif test "$prev" = dlprefiles; then
+	  # The library was specified with -dlpreopen.
+	  dlprefiles="$dlprefiles $arg"
+	  prev=
+	else
+	  deplibs="$deplibs $arg"
+	fi
+	continue
+	;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case $arg in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+	;;
+      esac # arg
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+      fi
+    done # argument parsing loop
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      compile_command="$compile_command $arg"
+      finalize_command="$finalize_command $arg"
+    fi
+
+    # calculate the name of the file, without its directory
+    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+    libobjs_save="$libobjs"
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+    else
+      shlib_search_path=
+    fi
+    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+    if test "X$output_objdir" = "X$output"; then
+      output_objdir="$objdir"
+    else
+      output_objdir="$output_objdir/$objdir"
+    fi
+    # Create the object directory.
+    if test ! -d $output_objdir; then
+      $show "$mkdir $output_objdir"
+      $run $mkdir $output_objdir
+      status=$?
+      if test $status -ne 0 && test ! -d $output_objdir; then
+	exit $status
+      fi
+    fi
+
+    # Determine the type of output
+    case $output in
+    "")
+      $echo "$modename: you must specify an output file" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+      ;;
+    *.$libext) linkmode=oldlib ;;
+    *.lo | *.$objext) linkmode=obj ;;
+    *.la) linkmode=lib ;;
+    *) linkmode=prog ;; # Anything else should be a program.
+    esac
+
+    specialdeplibs=
+    libs=
+    # Find all interdependent deplibs by searching for libraries
+    # that are linked more than once (e.g. -la -lb -la)
+    for deplib in $deplibs; do
+      case "$libs " in
+      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+      esac
+      libs="$libs $deplib"
+    done
+    deplibs=
+    newdependency_libs=
+    newlib_search_path=
+    need_relink=no # whether we're linking any uninstalled libtool libraries
+    notinst_deplibs= # not-installed libtool libraries
+    notinst_path= # paths that contain not-installed libtool libraries
+    case $linkmode in
+    lib)
+	passes="conv link"
+	for file in $dlfiles $dlprefiles; do
+	  case $file in
+	  *.la) ;;
+	  *)
+	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
+	    exit 1
+	    ;;
+	  esac
+	done
+	;;
+    prog)
+	compile_deplibs=
+	finalize_deplibs=
+	alldeplibs=no
+	newdlfiles=
+	newdlprefiles=
+	passes="conv scan dlopen dlpreopen link"
+	;;
+    *)  passes="conv"
+	;;
+    esac
+    for pass in $passes; do
+      if test $linkmode = prog; then
+	# Determine which files to process
+	case $pass in
+	dlopen)
+	  libs="$dlfiles"
+	  save_deplibs="$deplibs" # Collect dlpreopened libraries
+	  deplibs=
+	  ;;
+	dlpreopen) libs="$dlprefiles" ;;
+	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+	esac
+      fi
+      for deplib in $libs; do
+	lib=
+	found=no
+	case $deplib in
+	-l*)
+	  if test $linkmode = oldlib && test $linkmode = obj; then
+	    $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2
+	    continue
+	  fi
+	  if test $pass = conv; then
+	    deplibs="$deplib $deplibs"
+	    continue
+	  fi
+	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+	    # Search the libtool library
+	    lib="$searchdir/lib${name}.la"
+	    if test -f "$lib"; then
+	      found=yes
+	      break
+	    fi
+	  done
+	  if test "$found" != yes; then
+	    # deplib doesn't seem to be a libtool library
+	    if test "$linkmode,$pass" = "prog,link"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
+	  fi
+	  ;; # -l
+	-L*)
+	  case $linkmode in
+	  lib)
+	    deplibs="$deplib $deplibs"
+	    test $pass = conv && continue
+	    newdependency_libs="$deplib $newdependency_libs"
+	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+	    ;;
+	  prog)
+	    if test $pass = conv; then
+	      deplibs="$deplib $deplibs"
+	      continue
+	    fi
+	    if test $pass = scan; then
+	      deplibs="$deplib $deplibs"
+	      newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    ;;
+	  *)
+	    $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2
+	    ;;
+	  esac # linkmode
+	  continue
+	  ;; # -L
+	-R*)
+	  if test $pass = link; then
+	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+	    # Make sure the xrpath contains only unique directories.
+	    case "$xrpath " in
+	    *" $dir "*) ;;
+	    *) xrpath="$xrpath $dir" ;;
+	    esac
+	  fi
+	  deplibs="$deplib $deplibs"
+	  continue
+	  ;;
+	*.la) lib="$deplib" ;;
+	*.$libext)
+	  if test $pass = conv; then
+	    deplibs="$deplib $deplibs"
+	    continue
+	  fi
+	  case $linkmode in
+	  lib)
+	    if test "$deplibs_check_method" != pass_all; then
+	      echo
+	      echo "*** Warning: This library needs some functionality provided by $deplib."
+	      echo "*** I have the capability to make that library automatically link in when"
+	      echo "*** you link to this library.  But I can only do this if you have a"
+	      echo "*** shared version of the library, which you do not appear to have."
+	    else
+	      echo
+	      echo "*** Warning: Linking the shared library $output against the"
+	      echo "*** static library $deplib is not portable!"
+	      deplibs="$deplib $deplibs"
+	    fi
+	    continue
+	    ;;
+	  prog)
+	    if test $pass != link; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    continue
+	    ;;
+	  esac # linkmode
+	  ;; # *.$libext
+	*.lo | *.$objext)
+	  if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	    # If there is no dlopen support or we're linking statically,
+	    # we need to preload.
+	    newdlprefiles="$newdlprefiles $deplib"
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    newdlfiles="$newdlfiles $deplib"
+	  fi
+	  continue
+	  ;;
+	%DEPLIBS%)
+	  alldeplibs=yes
+	  continue
+	  ;;
+	esac # case $deplib
+	if test $found = yes || test -f "$lib"; then :
+	else
+	  $echo "$modename: cannot find the library \`$lib'" 1>&2
+	  exit 1
+	fi
+
+	# Check to see that this really is a libtool archive.
+	if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+	  exit 1
+	fi
+
+	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$ladir" = "X$lib" && ladir="."
+
+	dlname=
+	dlopen=
+	dlpreopen=
+	libdir=
+	library_names=
+	old_library=
+	# If the library was installed with an old release of libtool,
+	# it will not redefine variable installed.
+	installed=yes
+
+	# Read the .la file
+	case $lib in
+	*/* | *\\*) . $lib ;;
+	*) . ./$lib ;;
+	esac
+
+	if test "$linkmode,$pass" = "lib,link" ||
+	   test "$linkmode,$pass" = "prog,scan" ||
+	   { test $linkmode = oldlib && test $linkmode = obj; }; then
+	   # Add dl[pre]opened files of deplib
+	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+	fi
+
+	if test $pass = conv; then
+	  # Only check for convenience libraries
+	  deplibs="$lib $deplibs"
+	  if test -z "$libdir"; then
+	    if test -z "$old_library"; then
+	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+	      exit 1
+	    fi
+	    # It is a libtool convenience library, so add in its objects.
+	    convenience="$convenience $ladir/$objdir/$old_library"
+	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
+	    tmp_libs=
+	    for deplib in $dependency_libs; do
+	      deplibs="$deplib $deplibs"
+	      case "$tmp_libs " in
+	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      esac
+	      tmp_libs="$tmp_libs $deplib"
+	    done
+	  elif test $linkmode != prog && test $linkmode != lib; then
+	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
+	    exit 1
+	  fi
+	  continue
+	fi # $pass = conv
+
+	# Get the name of the library we link against.
+	linklib=
+	for l in $old_library $library_names; do
+	  linklib="$l"
+	done
+	if test -z "$linklib"; then
+	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+	  exit 1
+	fi
+
+	# This library was specified with -dlopen.
+	if test $pass = dlopen; then
+	  if test -z "$libdir"; then
+	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
+	    exit 1
+	  fi
+	  if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	    # If there is no dlname, no dlopen support or we're linking
+	    # statically, we need to preload.
+	    dlprefiles="$dlprefiles $lib"
+	  else
+	    newdlfiles="$newdlfiles $lib"
+	  fi
+	  continue
+	fi # $pass = dlopen
+
+	# We need an absolute path.
+	case $ladir in
+	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+	*)
+	  abs_ladir=`cd "$ladir" && pwd`
+	  if test -z "$abs_ladir"; then
+	    $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
+	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+	    abs_ladir="$ladir"
+	  fi
+	  ;;
+	esac
+	laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+
+	# Find the relevant object directory and library name.
+	if test "X$installed" = Xyes; then
+	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    $echo "$modename: warning: library \`$lib' was moved." 1>&2
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    libdir="$abs_ladir"
+	  else
+	    dir="$libdir"
+	    absdir="$libdir"
+	  fi
+	else
+	  dir="$ladir/$objdir"
+	  absdir="$abs_ladir/$objdir"
+	  # Remove this search path later
+	  notinst_path="$notinst_path $abs_ladir"
+	fi # $installed = yes
+	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+
+	# This library was specified with -dlpreopen.
+	if test $pass = dlpreopen; then
+	  if test -z "$libdir"; then
+	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
+	    exit 1
+	  fi
+	  # Prefer using a static library (so that no silly _DYNAMIC symbols
+	  # are required to link).
+	  if test -n "$old_library"; then
+	    newdlprefiles="$newdlprefiles $dir/$old_library"
+	  # Otherwise, use the dlname, so that lt_dlopen finds it.
+	  elif test -n "$dlname"; then
+	    newdlprefiles="$newdlprefiles $dir/$dlname"
+	  else
+	    newdlprefiles="$newdlprefiles $dir/$linklib"
+	  fi
+	fi # $pass = dlpreopen
+
+	if test -z "$libdir"; then
+	  # Link the convenience library
+	  if test $linkmode = lib; then
+	    deplibs="$dir/$old_library $deplibs"
+	  elif test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$dir/$old_library $compile_deplibs"
+	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+	  else
+	    deplibs="$lib $deplibs"
+	  fi
+	  continue
+	fi
+
+	if test $linkmode = prog && test $pass != link; then
+	  newlib_search_path="$newlib_search_path $ladir"
+	  deplibs="$lib $deplibs"
+
+	  linkalldeplibs=no
+	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
+	     test "$build_libtool_libs" = no; then
+	    linkalldeplibs=yes
+	  fi
+
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    case $deplib in
+	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+	    esac
+	    # Need to link against all dependency_libs?
+	    if test $linkalldeplibs = yes; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      # Need to hardcode shared library paths
+	      # or/and link against static libraries
+	      newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    case "$tmp_libs " in
+	    *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	    esac
+	    tmp_libs="$tmp_libs $deplib"
+	  done # for deplib
+	  continue
+	fi # $linkmode = prog...
+
+	link_static=no # Whether the deplib will be linked statically
+	if test -n "$library_names" &&
+	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+	  # Link against this shared library
+
+	  if test "$linkmode,$pass" = "prog,link" ||
+	   { test $linkmode = lib && test $hardcode_into_libs = yes; }; then
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) compile_rpath="$compile_rpath $absdir"
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) finalize_rpath="$finalize_rpath $libdir"
+	      esac
+	      ;;
+	    esac
+	    if test $linkmode = prog; then
+	      # We need to hardcode the library path
+	      if test -n "$shlibpath_var"; then
+		# Make sure the rpath contains only unique directories.
+		case "$temp_rpath " in
+		*" $dir "*) ;;
+		*" $absdir "*) ;;
+		*) temp_rpath="$temp_rpath $dir" ;;
+		esac
+	      fi
+	    fi
+	  fi # $linkmode,$pass = prog,link...
+
+	  if test "$alldeplibs" = yes &&
+	     { test "$deplibs_check_method" = pass_all ||
+	       { test "$build_libtool_libs" = yes &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
+	    continue
+	  fi
+
+	  if test "$installed" = no; then
+	    notinst_deplibs="$notinst_deplibs $lib"
+	    need_relink=no
+	  fi
+
+	  if test -n "$old_archive_from_expsyms_cmds"; then
+	    # figure out the soname
+	    set dummy $library_names
+	    realname="$2"
+	    shift; shift
+	    libname=`eval \\$echo \"$libname_spec\"`
+	    # use dlname if we got it. it's perfectly good, no?
+	    if test -n "$dlname"; then
+	      soname="$dlname"
+	    elif test -n "$soname_spec"; then
+	      # bleh windows
+	      case $host in
+	      *cygwin*)
+		major=`expr $current - $age`
+		versuffix="-$major"
+		;;
+	      esac
+	      eval soname=\"$soname_spec\"
+	    else
+	      soname="$realname"
+	    fi
+
+	    # Make a new name for the extract_expsyms_cmds to use
+	    soroot="$soname"
+	    soname=`echo $soroot | sed -e 's/^.*\///'`
+	    newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a"
+
+	    # If the library has no export list, then create one now
+	    if test -f "$output_objdir/$soname-def"; then :
+	    else
+	      $show "extracting exported symbol list from \`$soname'"
+	      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	      eval cmds=\"$extract_expsyms_cmds\"
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		$show "$cmd"
+		$run eval "$cmd" || exit $?
+	      done
+	      IFS="$save_ifs"
+	    fi
+
+	    # Create $newlib
+	    if test -f "$output_objdir/$newlib"; then :; else
+	      $show "generating import library for \`$soname'"
+	      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	      eval cmds=\"$old_archive_from_expsyms_cmds\"
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		$show "$cmd"
+		$run eval "$cmd" || exit $?
+	      done
+	      IFS="$save_ifs"
+	    fi
+	    # make sure the library variables are pointing to the new library
+	    dir=$output_objdir
+	    linklib=$newlib
+	  fi # test -n $old_archive_from_expsyms_cmds
+
+	  if test $linkmode = prog || test "$mode" != relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    lib_linked=yes
+	    case $hardcode_action in
+	    immediate | unsupported)
+	      if test "$hardcode_direct" = no; then
+		add="$dir/$linklib"
+	      elif test "$hardcode_minus_L" = no; then
+		case $host in
+		*-*-sunos*) add_shlibpath="$dir" ;;
+		esac
+		add_dir="-L$dir"
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = no; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    relink)
+	      if test "$hardcode_direct" = yes; then
+		add="$dir/$linklib"
+	      elif test "$hardcode_minus_L" = yes; then
+		add_dir="-L$dir"
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = yes; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    *) lib_linked=no ;;
+	    esac
+
+	    if test "$lib_linked" != yes; then
+	      $echo "$modename: configuration error: unsupported hardcode properties"
+	      exit 1
+	    fi
+
+	    if test -n "$add_shlibpath"; then
+	      case :$compile_shlibpath: in
+	      *":$add_shlibpath:"*) ;;
+	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+	      esac
+	    fi
+	    if test $linkmode = prog; then
+	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	      if test "$hardcode_direct" != yes && \
+		 test "$hardcode_minus_L" != yes && \
+		 test "$hardcode_shlibpath_var" = yes; then
+		case :$finalize_shlibpath: in
+		*":$libdir:"*) ;;
+		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+		esac
+	      fi
+	    fi
+	  fi
+
+	  if test $linkmode = prog || test "$mode" = relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    # Finalize command for both is simple: just hardcode it.
+	    if test "$hardcode_direct" = yes; then
+	      add="$libdir/$linklib"
+	    elif test "$hardcode_minus_L" = yes; then
+	      # Try looking first in the location we're being installed to.
+	      add_dir=
+	      if test -n "$inst_prefix_dir"; then
+		case "$libdir" in
+		[\\/]*)
+		  add_dir="-L$inst_prefix_dir$libdir"
+		  ;;
+		esac
+	      fi
+	      add_dir="$add_dir -L$libdir"
+	      add="-l$name"
+	    elif test "$hardcode_shlibpath_var" = yes; then
+	      case :$finalize_shlibpath: in
+	      *":$libdir:"*) ;;
+	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+	      esac
+	      add="-l$name"
+	    else
+	      # We cannot seem to hardcode it, guess we'll fake it.
+	      # Try looking first in the location we're being installed to.
+	      add_dir=
+	      if test -n "$inst_prefix_dir"; then
+		case "$libdir" in
+		[\\/]*)
+		  add_dir="-L$inst_prefix_dir$libdir"
+		  ;;
+		esac
+	      fi
+	      add_dir="$add_dir -L$libdir"
+	      add="-l$name"
+	    fi
+
+	    if test $linkmode = prog; then
+	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	    fi
+	  fi
+	elif test $linkmode = prog; then
+	  if test "$alldeplibs" = yes &&
+	     { test "$deplibs_check_method" = pass_all ||
+	       { test "$build_libtool_libs" = yes &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
+	    continue
+	  fi
+
+	  # Try to link the static library
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test "$hardcode_direct" != unsupported; then
+	    test -n "$old_library" && linklib="$old_library"
+	    compile_deplibs="$dir/$linklib $compile_deplibs"
+	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+	  else
+	    compile_deplibs="-l$name -L$dir $compile_deplibs"
+	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+	  fi
+	elif test "$build_libtool_libs" = yes; then
+	  # Not a shared library
+	  if test "$deplibs_check_method" != pass_all; then
+	    # We're trying link a shared library against a static one
+	    # but the system doesn't support it.
+
+	    # Just print a warning and add the library to dependency_libs so
+	    # that the program can be linked against the static library.
+	    echo
+	    echo "*** Warning: This library needs some functionality provided by $lib."
+	    echo "*** I have the capability to make that library automatically link in when"
+	    echo "*** you link to this library.  But I can only do this if you have a"
+	    echo "*** shared version of the library, which you do not appear to have."
+	    if test "$module" = yes; then
+	      echo "*** Therefore, libtool will create a static module, that should work "
+	      echo "*** as long as the dlopening application is linked with the -dlopen flag."
+	      if test -z "$global_symbol_pipe"; then
+	        echo
+	        echo "*** However, this would only work if libtool was able to extract symbol"
+	        echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	        echo "*** not find such a program.  So, this module is probably useless."
+	        echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      fi
+	      if test "$build_old_libs" = no; then
+	        build_libtool_libs=module
+	        build_old_libs=yes
+	      else
+	        build_libtool_libs=no
+	      fi
+	    fi
+	  else
+	    convenience="$convenience $dir/$old_library"
+	    old_convenience="$old_convenience $dir/$old_library"
+	    deplibs="$dir/$old_library $deplibs"
+	    link_static=yes
+	  fi
+	fi # link shared/static library?
+
+	if test $linkmode = lib; then
+	  if test -n "$dependency_libs" &&
+	     { test $hardcode_into_libs != yes || test $build_old_libs = yes ||
+	       test $link_static = yes; }; then
+	    # Extract -R from dependency_libs
+	    temp_deplibs=
+	    for libdir in $dependency_libs; do
+	      case $libdir in
+	      -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
+		   case " $xrpath " in
+		   *" $temp_xrpath "*) ;;
+		   *) xrpath="$xrpath $temp_xrpath";;
+		   esac;;
+	      *) temp_deplibs="$temp_deplibs $libdir";;
+	      esac
+	    done
+	    dependency_libs="$temp_deplibs"
+	  fi
+
+	  newlib_search_path="$newlib_search_path $absdir"
+	  # Link against this library
+	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  # ... and its dependency_libs
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    newdependency_libs="$deplib $newdependency_libs"
+	    case "$tmp_libs " in
+	    *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	    esac
+	    tmp_libs="$tmp_libs $deplib"
+	  done
+
+	  if test $link_all_deplibs != no; then
+	    # Add the search paths of all dependency libraries
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      -L*) path="$deplib" ;;
+	      *.la)
+		dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
+		test "X$dir" = "X$deplib" && dir="."
+		# We need an absolute path.
+		case $dir in
+		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+		*)
+		  absdir=`cd "$dir" && pwd`
+		  if test -z "$absdir"; then
+		    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+		    absdir="$dir"
+		  fi
+		  ;;
+		esac
+		if grep "^installed=no" $deplib > /dev/null; then
+		  path="-L$absdir/$objdir"
+		else
+		  eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  if test -z "$libdir"; then
+		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+		    exit 1
+		  fi
+		  if test "$absdir" != "$libdir"; then
+		    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
+		  fi
+		  path="-L$absdir"
+		fi
+		;;
+	      *) continue ;;
+	      esac
+	      case " $deplibs " in
+	      *" $path "*) ;;
+	      *) deplibs="$deplibs $path" ;;
+	      esac
+	    done
+	  fi # link_all_deplibs != no
+	fi # linkmode = lib
+      done # for deplib in $libs
+      if test $pass = dlpreopen; then
+	# Link the dlpreopened libraries before other libraries
+	for deplib in $save_deplibs; do
+	  deplibs="$deplib $deplibs"
+	done
+      fi
+      if test $pass != dlopen; then
+	test $pass != scan && dependency_libs="$newdependency_libs"
+	if test $pass != conv; then
+	  # Make sure lib_search_path contains only unique directories.
+	  lib_search_path=
+	  for dir in $newlib_search_path; do
+	    case "$lib_search_path " in
+	    *" $dir "*) ;;
+	    *) lib_search_path="$lib_search_path $dir" ;;
+	    esac
+	  done
+	  newlib_search_path=
+	fi
+
+	if test "$linkmode,$pass" != "prog,link"; then
+	  vars="deplibs"
+	else
+	  vars="compile_deplibs finalize_deplibs"
+	fi
+	for var in $vars dependency_libs; do
+	  # Add libraries to $var in reverse order
+	  eval tmp_libs=\"\$$var\"
+	  new_libs=
+	  for deplib in $tmp_libs; do
+	    case $deplib in
+	    -L*) new_libs="$deplib $new_libs" ;;
+	    *)
+	      case " $specialdeplibs " in
+	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
+	      *)
+		case " $new_libs " in
+		*" $deplib "*) ;;
+		*) new_libs="$deplib $new_libs" ;;
+		esac
+		;;
+	      esac
+	      ;;
+	    esac
+	  done
+	  tmp_libs=
+	  for deplib in $new_libs; do
+	    case $deplib in
+	    -L*)
+	      case " $tmp_libs " in
+	      *" $deplib "*) ;;
+	      *) tmp_libs="$tmp_libs $deplib" ;;
+	      esac
+	      ;;
+	    *) tmp_libs="$tmp_libs $deplib" ;;
+	    esac
+	  done
+	  eval $var=\"$tmp_libs\"
+	done # for var
+      fi
+      if test "$pass" = "conv" &&
+       { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then
+	libs="$deplibs" # reset libs
+	deplibs=
+      fi
+    done # for pass
+    if test $linkmode = prog; then
+      dlfiles="$newdlfiles"
+      dlprefiles="$newdlprefiles"
+    fi
+
+    case $linkmode in
+    oldlib)
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
+      fi
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs="$output"
+      objs="$objs$old_deplibs"
+      ;;
+
+    lib)
+      # Make sure we only generate libraries of the form `libNAME.la'.
+      case $outputname in
+      lib*)
+	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+	eval libname=\"$libname_spec\"
+	;;
+      *)
+	if test "$module" = no; then
+	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+	if test "$need_lib_prefix" != no; then
+	  # Add the "lib" prefix for modules if required
+	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	  eval libname=\"$libname_spec\"
+	else
+	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	fi
+	;;
+      esac
+
+      if test -n "$objs"; then
+	if test "$deplibs_check_method" != pass_all; then
+	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
+	  exit 1
+	else
+	  echo
+	  echo "*** Warning: Linking the shared library $output against the non-libtool"
+	  echo "*** objects $objs is not portable!"
+	  libobjs="$libobjs $objs"
+	fi
+      fi
+
+      if test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
+      fi
+
+      set dummy $rpath
+      if test $# -gt 2; then
+	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+      fi
+      install_libdir="$2"
+
+      oldlibs=
+      if test -z "$rpath"; then
+	if test "$build_libtool_libs" = yes; then
+	  # Building a libtool convenience library.
+	  libext=al
+	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+	  build_libtool_libs=convenience
+	  build_old_libs=yes
+	fi
+
+	if test -n "$vinfo"; then
+	  $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
+	fi
+
+	if test -n "$release"; then
+	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+	fi
+      else
+
+	# Parse the version information argument.
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=':'
+	set dummy $vinfo 0 0 0
+	IFS="$save_ifs"
+
+	if test -n "$8"; then
+	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+
+	current="$2"
+	revision="$3"
+	age="$4"
+
+	# Check that each of the things are valid numbers.
+	case $current in
+	[0-9]*) ;;
+	*)
+	  $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	case $revision in
+	[0-9]*) ;;
+	*)
+	  $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	case $age in
+	[0-9]*) ;;
+	*)
+	  $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	if test $age -gt $current; then
+	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	fi
+
+	# Calculate the version variables.
+	major=
+	versuffix=
+	verstring=
+	case $version_type in
+	none) ;;
+
+	darwin)
+	  # Like Linux, but with the current version available in
+	  # verstring for coding it into the library header
+	  major=.`expr $current - $age`
+	  versuffix="$major.$age.$revision"
+	  # Darwin ld doesn't like 0 for these options...
+	  minor_current=`expr $current + 1`
+	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+	  ;;
+
+	freebsd-aout)
+	  major=".$current"
+	  versuffix=".$current.$revision";
+	  ;;
+
+	freebsd-elf)
+	  major=".$current"
+	  versuffix=".$current";
+	  ;;
+
+	irix)
+	  major=`expr $current - $age + 1`
+	  verstring="sgi$major.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$revision
+	  while test $loop != 0; do
+	    iface=`expr $revision - $loop`
+	    loop=`expr $loop - 1`
+	    verstring="sgi$major.$iface:$verstring"
+	  done
+
+	  # Before this point, $major must not contain `.'.
+	  major=.$major
+	  versuffix="$major.$revision"
+	  ;;
+
+	linux)
+	  major=.`expr $current - $age`
+	  versuffix="$major.$age.$revision"
+	  ;;
+
+	osf)
+	  major=`expr $current - $age`
+	  versuffix=".$current.$age.$revision"
+	  verstring="$current.$age.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$age
+	  while test $loop != 0; do
+	    iface=`expr $current - $loop`
+	    loop=`expr $loop - 1`
+	    verstring="$verstring:${iface}.0"
+	  done
+
+	  # Make executables depend on our current version.
+	  verstring="$verstring:${current}.0"
+	  ;;
+
+	sunos)
+	  major=".$current"
+	  versuffix=".$current.$revision"
+	  ;;
+
+	windows)
+	  # Use '-' rather than '.', since we only want one
+	  # extension on DOS 8.3 filesystems.
+	  major=`expr $current - $age`
+	  versuffix="-$major"
+	  ;;
+
+	*)
+	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
+	  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	# Clear the version info if we defaulted, and they specified a release.
+	if test -z "$vinfo" && test -n "$release"; then
+	  major=
+	  verstring="0.0"
+	  if test "$need_version" = no; then
+	    versuffix=
+	  else
+	    versuffix=".0.0"
+	  fi
+	fi
+
+	# Remove version info from name if versioning should be avoided
+	if test "$avoid_version" = yes && test "$need_version" = no; then
+	  major=
+	  versuffix=
+	  verstring=""
+	fi
+
+	# Check to see if the archive will have undefined symbols.
+	if test "$allow_undefined" = yes; then
+	  if test "$allow_undefined_flag" = unsupported; then
+	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+	    build_libtool_libs=no
+	    build_old_libs=yes
+	  fi
+	else
+	  # Don't allow undefined symbols.
+	  allow_undefined_flag="$no_undefined_flag"
+	fi
+      fi
+
+      if test "$mode" != relink; then
+	# Remove our outputs.
+	$show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
+	$run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
+      fi
+
+      # Now set the variables for building old libraries.
+      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+	oldlibs="$oldlibs $output_objdir/$libname.$libext"
+
+	# Transform .lo files to .o files.
+	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+      fi
+
+      # Eliminate all temporary directories.
+      for path in $notinst_path; do
+	lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'`
+	deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'`
+	dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'`
+      done
+
+      if test -n "$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	temp_xrpath=
+	for libdir in $xrpath; do
+	  temp_xrpath="$temp_xrpath -R$libdir"
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+	  esac
+	done
+	if test $hardcode_into_libs != yes || test $build_old_libs = yes; then
+	  dependency_libs="$temp_xrpath $dependency_libs"
+	fi
+      fi
+
+      # Make sure dlfiles contains only unique files that won't be dlpreopened
+      old_dlfiles="$dlfiles"
+      dlfiles=
+      for lib in $old_dlfiles; do
+	case " $dlprefiles $dlfiles " in
+	*" $lib "*) ;;
+	*) dlfiles="$dlfiles $lib" ;;
+	esac
+      done
+
+      # Make sure dlprefiles contains only unique files
+      old_dlprefiles="$dlprefiles"
+      dlprefiles=
+      for lib in $old_dlprefiles; do
+	case "$dlprefiles " in
+	*" $lib "*) ;;
+	*) dlprefiles="$dlprefiles $lib" ;;
+	esac
+      done
+
+      if test "$build_libtool_libs" = yes; then
+	if test -n "$rpath"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+	    # these systems don't actually have a c library (as such)!
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C library is in the System framework
+	    deplibs="$deplibs -framework System"
+	    ;;
+	  *-*-netbsd*)
+	    # Don't link with libc until the a.out ld.so is fixed.
+	    ;;
+	  *)
+	    # Add libc to deplibs on all other systems if necessary.
+	    if test $build_libtool_need_lc = "yes"; then
+	      deplibs="$deplibs -lc"
+	    fi
+	    ;;
+	  esac
+	fi
+
+	# Transform deplibs into only deplibs that can be linked in shared.
+	name_save=$name
+	libname_save=$libname
+	release_save=$release
+	versuffix_save=$versuffix
+	major_save=$major
+	# I'm not sure if I'm treating the release correctly.  I think
+	# release should show up in the -l (ie -lgmp5) so we don't want to
+	# add it in twice.  Is that correct?
+	release=""
+	versuffix=""
+	major=""
+	newdeplibs=
+	droppeddeps=no
+	case $deplibs_check_method in
+	pass_all)
+	  # Don't check for shared/static.  Everything works.
+	  # This might be a little naive.  We might want to check
+	  # whether the library exists or not.  But this is on
+	  # osf3 & osf4 and I'm not really sure... Just
+	  # implementing what was already the behaviour.
+	  newdeplibs=$deplibs
+	  ;;
+	test_compile)
+	  # This code stresses the "libraries are programs" paradigm to its
+	  # limits. Maybe even breaks it.  We compile a program, linking it
+	  # against the deplibs as a proxy for the library.  Then we can check
+	  # whether they linked in statically or dynamically with ldd.
+	  $rm conftest.c
+	  cat > conftest.c <<EOF
+	  int main() { return 0; }
+EOF
+	  $rm conftest
+	  $CC -o conftest conftest.c $deplibs
+	  if test $? -eq 0 ; then
+	    ldd_output=`ldd conftest`
+	    for i in $deplibs; do
+	      name="`expr $i : '-l\(.*\)'`"
+	      # If $name is empty we are operating on a -L argument.
+	      if test -n "$name" && test "$name" != "0"; then
+		libname=`eval \\$echo \"$libname_spec\"`
+		deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		set dummy $deplib_matches
+		deplib_match=$2
+		if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		  newdeplibs="$newdeplibs $i"
+		else
+		  droppeddeps=yes
+		  echo
+		  echo "*** Warning: This library needs some functionality provided by $i."
+		  echo "*** I have the capability to make that library automatically link in when"
+		  echo "*** you link to this library.  But I can only do this if you have a"
+		  echo "*** shared version of the library, which you do not appear to have."
+		fi
+	      else
+		newdeplibs="$newdeplibs $i"
+	      fi
+	    done
+	  else
+	    # Error occured in the first compile.  Let's try to salvage the situation:
+	    # Compile a seperate program for each library.
+	    for i in $deplibs; do
+	      name="`expr $i : '-l\(.*\)'`"
+	     # If $name is empty we are operating on a -L argument.
+	      if test -n "$name" && test "$name" != "0"; then
+		$rm conftest
+		$CC -o conftest conftest.c $i
+		# Did it work?
+		if test $? -eq 0 ; then
+		  ldd_output=`ldd conftest`
+		  libname=`eval \\$echo \"$libname_spec\"`
+		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		  set dummy $deplib_matches
+		  deplib_match=$2
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		    newdeplibs="$newdeplibs $i"
+		  else
+		    droppeddeps=yes
+		    echo
+		    echo "*** Warning: This library needs some functionality provided by $i."
+		    echo "*** I have the capability to make that library automatically link in when"
+		    echo "*** you link to this library.  But I can only do this if you have a"
+		    echo "*** shared version of the library, which you do not appear to have."
+		  fi
+		else
+		  droppeddeps=yes
+		  echo
+		  echo "*** Warning!  Library $i is needed by this library but I was not able to"
+		  echo "***  make it link in!  You will probably need to install it or some"
+		  echo "*** library that it depends on before this library will be fully"
+		  echo "*** functional.  Installing it before continuing would be even better."
+		fi
+	      else
+		newdeplibs="$newdeplibs $i"
+	      fi
+	    done
+	  fi
+	  ;;
+	file_magic*)
+	  set dummy $deplibs_check_method
+	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    name="`expr $a_deplib : '-l\(.*\)'`"
+	    # If $name is empty we are operating on a -L argument.
+	    if test -n "$name" && test "$name" != "0"; then
+	      libname=`eval \\$echo \"$libname_spec\"`
+	      for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		    potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		    for potent_lib in $potential_libs; do
+		      # Follow soft links.
+		      if ls -lLd "$potent_lib" 2>/dev/null \
+			 | grep " -> " >/dev/null; then
+			continue
+		      fi
+		      # The statement above tries to avoid entering an
+		      # endless loop below, in case of cyclic links.
+		      # We might still enter an endless loop, since a link
+		      # loop can be closed while we follow links,
+		      # but so what?
+		      potlib="$potent_lib"
+		      while test -h "$potlib" 2>/dev/null; do
+			potliblink=`ls -ld $potlib | sed 's/.* -> //'`
+			case $potliblink in
+			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+			esac
+		      done
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
+			 | sed 10q \
+			 | egrep "$file_magic_regex" > /dev/null; then
+			newdeplibs="$newdeplibs $a_deplib"
+			a_deplib=""
+			break 2
+		      fi
+		    done
+	      done
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		echo
+		echo "*** Warning: This library needs some functionality provided by $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have."
+	      fi
+	    else
+	      # Add a -L argument.
+	      newdeplibs="$newdeplibs $a_deplib"
+	    fi
+	  done # Gone through all deplibs.
+	  ;;
+	match_pattern*)
+	  set dummy $deplibs_check_method
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    name="`expr $a_deplib : '-l\(.*\)'`"
+	    # If $name is empty we are operating on a -L argument.
+	    if test -n "$name" && test "$name" != "0"; then
+	      libname=`eval \\$echo \"$libname_spec\"`
+	      for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		for potent_lib in $potential_libs; do
+		  if eval echo \"$potent_lib\" 2>/dev/null \
+		      | sed 10q \
+		      | egrep "$match_pattern_regex" > /dev/null; then
+		    newdeplibs="$newdeplibs $a_deplib"
+		    a_deplib=""
+		    break 2
+		  fi
+		done
+	      done
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		echo
+		echo "*** Warning: This library needs some functionality provided by $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have."
+	      fi
+	    else
+	      # Add a -L argument.
+	      newdeplibs="$newdeplibs $a_deplib"
+	    fi
+	  done # Gone through all deplibs.
+	  ;;
+	none | unknown | *)
+	  newdeplibs=""
+	  if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+	       -e 's/ -[LR][^ ]*//g' -e 's/[ 	]//g' |
+	     grep . >/dev/null; then
+	    echo
+	    if test "X$deplibs_check_method" = "Xnone"; then
+	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+	    else
+	      echo "*** Warning: inter-library dependencies are not known to be supported."
+	    fi
+	    echo "*** All declared inter-library dependencies are being dropped."
+	    droppeddeps=yes
+	  fi
+	  ;;
+	esac
+	versuffix=$versuffix_save
+	major=$major_save
+	release=$release_save
+	libname=$libname_save
+	name=$name_save
+
+	case $host in
+	*-*-rhapsody* | *-*-darwin1.[012])
+	  # On Rhapsody replace the C library is the System framework
+	  newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	  ;;
+	esac
+
+	if test "$droppeddeps" = yes; then
+	  if test "$module" = yes; then
+	    echo
+	    echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    echo "*** dependencies of module $libname.  Therefore, libtool will create"
+	    echo "*** a static module, that should work as long as the dlopening"
+	    echo "*** application is linked with the -dlopen flag."
+	    if test -z "$global_symbol_pipe"; then
+	      echo
+	      echo "*** However, this would only work if libtool was able to extract symbol"
+	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      echo "*** not find such a program.  So, this module is probably useless."
+	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	    fi
+	    if test "$build_old_libs" = no; then
+	      oldlibs="$output_objdir/$libname.$libext"
+	      build_libtool_libs=module
+	      build_old_libs=yes
+	    else
+	      build_libtool_libs=no
+	    fi
+	  else
+	    echo "*** The inter-library dependencies that have been dropped here will be"
+	    echo "*** automatically added whenever a program is linked with this library"
+	    echo "*** or is declared to -dlopen it."
+
+	    if test $allow_undefined = no; then
+	      echo
+	      echo "*** Since this library must not contain undefined symbols,"
+	      echo "*** because either the platform does not support them or"
+	      echo "*** it was explicitly requested with -no-undefined,"
+	      echo "*** libtool will only create a static version of it."
+	      if test "$build_old_libs" = no; then
+		oldlibs="$output_objdir/$libname.$libext"
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  fi
+	fi
+	# Done checking deplibs!
+	deplibs=$newdeplibs
+      fi
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+
+      # Test again, we may have decided not to build it any more
+      if test "$build_libtool_libs" = yes; then
+	if test $hardcode_into_libs = yes; then
+	  # Hardcode the library paths
+	  hardcode_libdirs=
+	  dep_rpath=
+	  rpath="$finalize_rpath"
+	  test "$mode" != relink && rpath="$compile_rpath$rpath"
+	  for libdir in $rpath; do
+	    if test -n "$hardcode_libdir_flag_spec"; then
+	      if test -n "$hardcode_libdir_separator"; then
+		if test -z "$hardcode_libdirs"; then
+		  hardcode_libdirs="$libdir"
+		else
+		  # Just accumulate the unique libdirs.
+		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		    ;;
+		  *)
+		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		    ;;
+		  esac
+		fi
+	      else
+		eval flag=\"$hardcode_libdir_flag_spec\"
+		dep_rpath="$dep_rpath $flag"
+	      fi
+	    elif test -n "$runpath_var"; then
+	      case "$perm_rpath " in
+	      *" $libdir "*) ;;
+	      *) perm_rpath="$perm_rpath $libdir" ;;
+	      esac
+	    fi
+	  done
+	  # Substitute the hardcoded libdirs into the rpath.
+	  if test -n "$hardcode_libdir_separator" &&
+	     test -n "$hardcode_libdirs"; then
+	    libdir="$hardcode_libdirs"
+	    eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+	  fi
+	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
+	    # We should set the runpath_var.
+	    rpath=
+	    for dir in $perm_rpath; do
+	      rpath="$rpath$dir:"
+	    done
+	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+	  fi
+	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+	fi
+
+	shlibpath="$finalize_shlibpath"
+	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+	if test -n "$shlibpath"; then
+	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+	fi
+
+	# Get the real and link names of the library.
+	eval library_names=\"$library_names_spec\"
+	set dummy $library_names
+	realname="$2"
+	shift; shift
+
+	if test -n "$soname_spec"; then
+	  eval soname=\"$soname_spec\"
+	else
+	  soname="$realname"
+	fi
+	test -z "$dlname" && dlname=$soname
+
+	lib="$output_objdir/$realname"
+	for link
+	do
+	  linknames="$linknames $link"
+	done
+
+	# Ensure that we have .o objects for linkers which dislike .lo
+	# (e.g. aix) in case we are running --disable-static
+	for obj in $libobjs; do
+	  xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+	  if test "X$xdir" = "X$obj"; then
+	    xdir="."
+	  else
+	    xdir="$xdir"
+	  fi
+	  baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+	  oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+	  if test ! -f $xdir/$oldobj; then
+	    $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
+	    $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
+	  fi
+	done
+
+	# Use standard objects if they are pic
+	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+
+	# Prepare the list of exported symbols
+	if test -z "$export_symbols"; then
+	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+	    $show "generating symbol list for \`$libname.la'"
+	    export_symbols="$output_objdir/$libname.exp"
+	    $run $rm $export_symbols
+	    eval cmds=\"$export_symbols_cmds\"
+	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	    for cmd in $cmds; do
+	      IFS="$save_ifs"
+	      $show "$cmd"
+	      $run eval "$cmd" || exit $?
+	    done
+	    IFS="$save_ifs"
+	    if test -n "$export_symbols_regex"; then
+	      $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+	      $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
+	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+	fi
+
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+	fi
+
+	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	  else
+	    gentop="$output_objdir/${outputname}x"
+	    $show "${rm}r $gentop"
+	    $run ${rm}r "$gentop"
+	    $show "mkdir $gentop"
+	    $run mkdir "$gentop"
+	    status=$?
+	    if test $status -ne 0 && test ! -d "$gentop"; then
+	      exit $status
+	    fi
+	    generated="$generated $gentop"
+
+	    for xlib in $convenience; do
+	      # Extract the objects.
+	      case $xlib in
+	      [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+	      *) xabs=`pwd`"/$xlib" ;;
+	      esac
+	      xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+	      xdir="$gentop/$xlib"
+
+	      $show "${rm}r $xdir"
+	      $run ${rm}r "$xdir"
+	      $show "mkdir $xdir"
+	      $run mkdir "$xdir"
+	      status=$?
+	      if test $status -ne 0 && test ! -d "$xdir"; then
+		exit $status
+	      fi
+	      $show "(cd $xdir && $AR x $xabs)"
+	      $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+	      libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
+	    done
+	  fi
+	fi
+
+	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+	  eval flag=\"$thread_safe_flag_spec\"
+	  linker_flags="$linker_flags $flag"
+	fi
+
+	# Make a backup of the uninstalled library when relinking
+	if test "$mode" = relink; then
+	  $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
+	fi
+
+	# Do each of the archive commands.
+	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	  eval cmds=\"$archive_expsym_cmds\"
+	else
+	  eval cmds=\"$archive_cmds\"
+	fi
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  $show "$cmd"
+	  $run eval "$cmd" || exit $?
+	done
+	IFS="$save_ifs"
+
+	# Restore the uninstalled library and exit
+	if test "$mode" = relink; then
+	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+	  exit 0
+	fi
+
+	# Create links to the real library.
+	for linkname in $linknames; do
+	  if test "$realname" != "$linkname"; then
+	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
+	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
+	  fi
+	done
+
+	# If -module or -export-dynamic was specified, set the dlname.
+	if test "$module" = yes || test "$export_dynamic" = yes; then
+	  # On all known operating systems, these are identical.
+	  dlname="$soname"
+	fi
+      fi
+      ;;
+
+    obj)
+      if test -n "$deplibs"; then
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
+      fi
+
+      case $output in
+      *.lo)
+	if test -n "$objs$old_deplibs"; then
+	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+	  exit 1
+	fi
+	libobj="$output"
+	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+	;;
+      *)
+	libobj=
+	obj="$output"
+	;;
+      esac
+
+      # Delete the old objects.
+      $run $rm $obj $libobj
+
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # reload_cmds runs $LD directly, so let us get rid of
+      # -Wl from whole_archive_flag_spec
+      wl=
+
+      if test -n "$convenience"; then
+	if test -n "$whole_archive_flag_spec"; then
+	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+	else
+	  gentop="$output_objdir/${obj}x"
+	  $show "${rm}r $gentop"
+	  $run ${rm}r "$gentop"
+	  $show "mkdir $gentop"
+	  $run mkdir "$gentop"
+	  status=$?
+	  if test $status -ne 0 && test ! -d "$gentop"; then
+	    exit $status
+	  fi
+	  generated="$generated $gentop"
+
+	  for xlib in $convenience; do
+	    # Extract the objects.
+	    case $xlib in
+	    [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+	    *) xabs=`pwd`"/$xlib" ;;
+	    esac
+	    xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+	    xdir="$gentop/$xlib"
+
+	    $show "${rm}r $xdir"
+	    $run ${rm}r "$xdir"
+	    $show "mkdir $xdir"
+	    $run mkdir "$xdir"
+	    status=$?
+	    if test $status -ne 0 && test ! -d "$xdir"; then
+	      exit $status
+	    fi
+	    $show "(cd $xdir && $AR x $xabs)"
+	    $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+	    reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
+	  done
+	fi
+      fi
+
+      # Create the old-style object.
+      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+      output="$obj"
+      eval cmds=\"$reload_cmds\"
+      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+	if test -n "$gentop"; then
+	  $show "${rm}r $gentop"
+	  $run ${rm}r $gentop
+	fi
+
+	exit 0
+      fi
+
+      if test "$build_libtool_libs" != yes; then
+	if test -n "$gentop"; then
+	  $show "${rm}r $gentop"
+	  $run ${rm}r $gentop
+	fi
+
+	# Create an invalid libtool object if no PIC, so that we don't
+	# accidentally link it into a program.
+	$show "echo timestamp > $libobj"
+	$run eval "echo timestamp > $libobj" || exit $?
+	exit 0
+      fi
+
+      if test -n "$pic_flag" || test "$pic_mode" != default; then
+	# Only do commands if we really have different PIC objects.
+	reload_objs="$libobjs $reload_conv_objs"
+	output="$libobj"
+	eval cmds=\"$reload_cmds\"
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  $show "$cmd"
+	  $run eval "$cmd" || exit $?
+	done
+	IFS="$save_ifs"
+      else
+	# Just create a symlink.
+	$show $rm $libobj
+	$run $rm $libobj
+	xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
+	if test "X$xdir" = "X$libobj"; then
+	  xdir="."
+	else
+	  xdir="$xdir"
+	fi
+	baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+	oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+	$show "(cd $xdir && $LN_S $oldobj $baseobj)"
+	$run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
+      fi
+
+      if test -n "$gentop"; then
+	$show "${rm}r $gentop"
+	$run ${rm}r $gentop
+      fi
+
+      exit 0
+      ;;
+
+    prog)
+      case $host in
+	*cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;;
+      esac
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
+      fi
+
+      if test "$preload" = yes; then
+	if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
+	   test "$dlopen_self_static" = unknown; then
+	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
+	fi
+      fi
+
+      case $host in
+      *-*-rhapsody* | *-*-darwin1.[012])
+	# On Rhapsody replace the C library is the System framework
+	compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	;;
+      esac
+
+      compile_command="$compile_command $compile_deplibs"
+      finalize_command="$finalize_command $finalize_deplibs"
+
+      if test -n "$rpath$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath $xrpath; do
+	  # This is the magic to use -rpath.
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+	  esac
+	done
+      fi
+
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    rpath="$rpath $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) perm_rpath="$perm_rpath $libdir" ;;
+	  esac
+	fi
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  case :$dllsearchpath: in
+	  *":$libdir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$libdir";;
+	  esac
+	  ;;
+	esac
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath="$rpath"
+
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    rpath="$rpath $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$finalize_perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath="$rpath"
+
+      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+	# Transform all the library objects into standard objects.
+	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+      fi
+
+      dlsyms=
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	  dlsyms="${outputname}S.c"
+	else
+	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
+	fi
+      fi
+
+      if test -n "$dlsyms"; then
+	case $dlsyms in
+	"") ;;
+	*.c)
+	  # Discover the nlist of each of the dlfiles.
+	  nlist="$output_objdir/${outputname}.nm"
+
+	  $show "$rm $nlist ${nlist}S ${nlist}T"
+	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
+
+	  # Parse the name list into a source file.
+	  $show "creating $output_objdir/$dlsyms"
+
+	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
+/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
+/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* Prevent the only kind of declaration conflicts we can make. */
+#define lt_preloaded_symbols some_other_symbol
+
+/* External symbol declarations for the compiler. */\
+"
+
+	  if test "$dlself" = yes; then
+	    $show "generating symbol list for \`$output'"
+
+	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
+
+	    # Add our own program objects to the symbol list.
+	    progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	    for arg in $progfiles; do
+	      $show "extracting global C symbols from \`$arg'"
+	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+	    done
+
+	    if test -n "$exclude_expsyms"; then
+	      $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      $run eval '$mv "$nlist"T "$nlist"'
+	    fi
+
+	    if test -n "$export_symbols_regex"; then
+	      $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      $run eval '$mv "$nlist"T "$nlist"'
+	    fi
+
+	    # Prepare the list of exported symbols
+	    if test -z "$export_symbols"; then
+	      export_symbols="$output_objdir/$output.exp"
+	      $run $rm $export_symbols
+	      $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	    else
+	      $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
+	      $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
+	      $run eval 'mv "$nlist"T "$nlist"'
+	    fi
+	  fi
+
+	  for arg in $dlprefiles; do
+	    $show "extracting global C symbols from \`$arg'"
+	    name=`echo "$arg" | sed -e 's%^.*/%%'`
+	    $run eval 'echo ": $name " >> "$nlist"'
+	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -z "$run"; then
+	    # Make sure we have at least an empty file.
+	    test -f "$nlist" || : > "$nlist"
+
+	    if test -n "$exclude_expsyms"; then
+	      egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	      $mv "$nlist"T "$nlist"
+	    fi
+
+	    # Try sorting and uniquifying the output.
+	    if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
+	      :
+	    else
+	      grep -v "^: " < "$nlist" > "$nlist"S
+	    fi
+
+	    if test -f "$nlist"S; then
+	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
+	    else
+	      echo '/* NONE */' >> "$output_objdir/$dlsyms"
+	    fi
+
+	    $echo >> "$output_objdir/$dlsyms" "\
+
+#undef lt_preloaded_symbols
+
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr_t address;
+}
+lt_preloaded_symbols[] =
+{\
+"
+
+	    sed -n -e 's/^: \([^ ]*\) $/  {\"\1\", (lt_ptr_t) 0},/p' \
+		-e 's/^. \([^ ]*\) \([^ ]*\)$/  {"\2", (lt_ptr_t) \&\2},/p' \
+		  < "$nlist" >> "$output_objdir/$dlsyms"
+
+	    $echo >> "$output_objdir/$dlsyms" "\
+  {0, (lt_ptr_t) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	  fi
+
+	  pic_flag_for_symtable=
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    case "$compile_command " in
+	    *" -static "*) ;;
+	    *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
+	    esac;;
+	  *-*-hpux*)
+	    case "$compile_command " in
+	    *" -static "*) ;;
+	    *) pic_flag_for_symtable=" $pic_flag -DPIC";;
+	    esac
+	  esac
+
+	  # Now compile the dynamic symbol file.
+	  $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+	  $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+
+	  # Clean up the generated files.
+	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
+	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
+
+	  # Transform the symbol file into the correct name.
+	  compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+	  finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+	  ;;
+	*)
+	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+	  exit 1
+	  ;;
+	esac
+      else
+	# We keep going just in case the user didn't refer to
+	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+	# really was required.
+
+	# Nullify the symbol file.
+	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+      fi
+
+      if test $need_relink = no || test "$build_libtool_libs" != yes; then
+	# Replace the output file specification.
+	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	link_command="$compile_command$compile_rpath"
+
+	# We have no uninstalled library dependencies, so finalize right now.
+	$show "$link_command"
+	$run eval "$link_command"
+	status=$?
+
+	# Delete the generated files.
+	if test -n "$dlsyms"; then
+	  $show "$rm $output_objdir/${outputname}S.${objext}"
+	  $run $rm "$output_objdir/${outputname}S.${objext}"
+	fi
+
+	exit $status
+      fi
+
+      if test -n "$shlibpath_var"; then
+	# We should set the shlibpath_var
+	rpath=
+	for dir in $temp_rpath; do
+	  case $dir in
+	  [\\/]* | [A-Za-z]:[\\/]*)
+	    # Absolute path.
+	    rpath="$rpath$dir:"
+	    ;;
+	  *)
+	    # Relative path: add a thisdir entry.
+	    rpath="$rpath\$thisdir/$dir:"
+	    ;;
+	  esac
+	done
+	temp_rpath="$rpath"
+      fi
+
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+	if test -n "$perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $perm_rpath; do
+	    rpath="$rpath$dir:"
+	  done
+	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+	if test -n "$finalize_perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $finalize_perm_rpath; do
+	    rpath="$rpath$dir:"
+	  done
+	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+      fi
+
+      if test "$no_install" = yes; then
+	# We don't need to create a wrapper script.
+	link_command="$compile_var$compile_command$compile_rpath"
+	# Replace the output file specification.
+	link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	# Delete the old output file.
+	$run $rm $output
+	# Link the executable and exit
+	$show "$link_command"
+	$run eval "$link_command" || exit $?
+	exit 0
+      fi
+
+      if test "$hardcode_action" = relink; then
+	# Fast installation is not supported
+	link_command="$compile_var$compile_command$compile_rpath"
+	relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
+	$echo "$modename: \`$output' will be relinked during installation" 1>&2
+      else
+	if test "$fast_install" != no; then
+	  link_command="$finalize_var$compile_command$finalize_rpath"
+	  if test "$fast_install" = yes; then
+	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+	  else
+	    # fast_install is set to needless
+	    relink_command=
+	  fi
+	else
+	  link_command="$compile_var$compile_command$compile_rpath"
+	  relink_command="$finalize_var$finalize_command$finalize_rpath"
+	fi
+      fi
+
+      # Replace the output file specification.
+      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+      # Delete the old output files.
+      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+      $show "$link_command"
+      $run eval "$link_command" || exit $?
+
+      # Now create the wrapper script.
+      $show "creating $output"
+
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+	# Preserve any variables that may affect compiler behavior
+	for var in $variables_saved_for_relink; do
+	  if eval test -z \"\${$var+set}\"; then
+	    relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+	  elif eval var_value=\$$var; test -z "$var_value"; then
+	    relink_command="$var=; export $var; $relink_command"
+	  else
+	    var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	  fi
+	done
+	relink_command="cd `pwd`; $relink_command"
+	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Quote $echo for shipping.
+      if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
+	case $0 in
+	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
+	*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
+	esac
+	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+      else
+	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Only actually do things if our run command is non-null.
+      if test -z "$run"; then
+	# win32 will think the script is a binary if it has
+	# a .exe suffix, so we strip it off here.
+	case $output in
+	  *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
+	esac
+	# test for cygwin because mv fails w/o .exe extensions
+	case $host in
+	  *cygwin*) exeext=.exe ;;
+	  *) exeext= ;;
+	esac
+	$rm $output
+	trap "$rm $output; exit 1" 1 2 15
+
+	$echo > $output "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variable:
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$echo are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    echo=\"$qecho\"
+    file=\"\$0\"
+    # Make sure echo works.
+    if test \"X\$1\" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
+      # Yippee, \$echo works!
+      :
+    else
+      # Restart under the correct shell, and then maybe \$echo will work.
+      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+    fi
+  fi\
+"
+	$echo >> $output "\
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
+  done
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test "$fast_install" = yes; then
+	  echo >> $output "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+
+  if test ! -f \"\$progdir/\$program\" || \\
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $mkdir \"\$progdir\"
+    else
+      $rm \"\$progdir/\$file\"
+    fi"
+
+	  echo >> $output "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if (eval \$relink_command); then :
+      else
+	$rm \"\$progdir/\$file\"
+	exit 1
+      fi
+    fi
+
+    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $rm \"\$progdir/\$program\";
+      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $rm \"\$progdir/\$file\"
+  fi"
+	else
+	  echo >> $output "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	echo >> $output "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# Export our shlibpath_var if we have one.
+	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $echo >> $output "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	# fixup the dll searchpath if we need to.
+	if test -n "$dllsearchpath"; then
+	  $echo >> $output "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	$echo >> $output "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+"
+	case $host in
+	# win32 systems need to use the prog path for dll
+	# lookup to work
+	*-*-cygwin* | *-*-pw32*)
+	  $echo >> $output "\
+      exec \$progdir/\$program \${1+\"\$@\"}
+"
+	  ;;
+
+	# Backslashes separate directories on plain windows
+	*-*-mingw | *-*-os2*)
+	  $echo >> $output "\
+      exec \$progdir\\\\\$program \${1+\"\$@\"}
+"
+	  ;;
+
+	*)
+	  $echo >> $output "\
+      # Export the path to the program.
+      PATH=\"\$progdir:\$PATH\"
+      export PATH
+
+      exec \$program \${1+\"\$@\"}
+"
+	  ;;
+	esac
+	$echo >> $output "\
+      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+      exit 1
+    fi
+  else
+    # The program doesn't exist.
+    \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+    \$echo \"This script is just a wrapper for \$program.\" 1>&2
+    echo \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+	chmod +x $output
+      fi
+      exit 0
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      if test "$build_libtool_libs" = convenience; then
+	oldobjs="$libobjs_save"
+	addlibs="$convenience"
+	build_libtool_libs=no
+      else
+	if test "$build_libtool_libs" = module; then
+	  oldobjs="$libobjs_save"
+	  build_libtool_libs=no
+	else
+	  oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
+	fi
+	addlibs="$old_convenience"
+      fi
+
+      if test -n "$addlibs"; then
+	gentop="$output_objdir/${outputname}x"
+	$show "${rm}r $gentop"
+	$run ${rm}r "$gentop"
+	$show "mkdir $gentop"
+	$run mkdir "$gentop"
+	status=$?
+	if test $status -ne 0 && test ! -d "$gentop"; then
+	  exit $status
+	fi
+	generated="$generated $gentop"
+
+	# Add in members from convenience archives.
+	for xlib in $addlibs; do
+	  # Extract the objects.
+	  case $xlib in
+	  [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+	  *) xabs=`pwd`"/$xlib" ;;
+	  esac
+	  xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+	  xdir="$gentop/$xlib"
+
+	  $show "${rm}r $xdir"
+	  $run ${rm}r "$xdir"
+	  $show "mkdir $xdir"
+	  $run mkdir "$xdir"
+	  status=$?
+	  if test $status -ne 0 && test ! -d "$xdir"; then
+	    exit $status
+	  fi
+	  $show "(cd $xdir && $AR x $xabs)"
+	  $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+	  oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
+	done
+      fi
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+	eval cmds=\"$old_archive_from_new_cmds\"
+      else
+	# Ensure that we have .o objects in place in case we decided
+	# not to build a shared library, and have fallen back to building
+	# static libs even though --disable-static was passed!
+	for oldobj in $oldobjs; do
+	  if test ! -f $oldobj; then
+	    xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
+	    if test "X$xdir" = "X$oldobj"; then
+	      xdir="."
+	    else
+	      xdir="$xdir"
+	    fi
+	    baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
+	    obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
+	    $show "(cd $xdir && ${LN_S} $obj $baseobj)"
+	    $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
+	  fi
+	done
+
+	eval cmds=\"$old_archive_cmds\"
+      fi
+      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$generated"; then
+      $show "${rm}r$generated"
+      $run ${rm}r$generated
+    fi
+
+    # Now create the libtool archive.
+    case $output in
+    *.la)
+      old_library=
+      test "$build_old_libs" = yes && old_library="$libname.$libext"
+      $show "creating $output"
+
+      # Preserve any variables that may affect compiler behavior
+      for var in $variables_saved_for_relink; do
+	if eval test -z \"\${$var+set}\"; then
+	  relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+	elif eval var_value=\$$var; test -z "$var_value"; then
+	  relink_command="$var=; export $var; $relink_command"
+	else
+	  var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+	  relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	fi
+      done
+      # Quote the link command for shipping.
+      relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args @inst_prefix_dir@"
+      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+
+      # Only create the output if not a dry run.
+      if test -z "$run"; then
+	for installed in no yes; do
+	  if test "$installed" = yes; then
+	    if test -z "$install_libdir"; then
+	      break
+	    fi
+	    output="$output_objdir/$outputname"i
+	    # Replace all uninstalled libtool libraries with the installed ones
+	    newdependency_libs=
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      *.la)
+		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
+		eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		if test -z "$libdir"; then
+		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+		  exit 1
+		fi
+		newdependency_libs="$newdependency_libs $libdir/$name"
+		;;
+	      *) newdependency_libs="$newdependency_libs $deplib" ;;
+	      esac
+	    done
+	    dependency_libs="$newdependency_libs"
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+	      eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+	      if test -z "$libdir"; then
+		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+		exit 1
+	      fi
+	      newdlfiles="$newdlfiles $libdir/$name"
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+	      eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+	      if test -z "$libdir"; then
+		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+		exit 1
+	      fi
+	      newdlprefiles="$newdlprefiles $libdir/$name"
+	    done
+	    dlprefiles="$newdlprefiles"
+	  fi
+	  $rm $output
+	  # place dlname in correct position for cygwin
+	  tdlname=$dlname
+	  case $host,$output,$installed,$module,$dlname in
+	    *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+	  esac
+	  $echo > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+	  if test "$installed" = no && test $need_relink = yes; then
+	    $echo >> $output "\
+relink_command=\"$relink_command\""
+	  fi
+	done
+      fi
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
+      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
+      ;;
+    esac
+    exit 0
+    ;;
+
+  # libtool install mode
+  install)
+    modename="$modename: install"
+
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+       # Allow the use of GNU shtool's install command.
+       $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
+      # Aesthetically quote it.
+      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	arg="\"$arg\""
+	;;
+      esac
+      install_prog="$arg "
+      arg="$1"
+      shift
+    else
+      install_prog=
+      arg="$nonopt"
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+    case $arg in
+    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+      arg="\"$arg\""
+      ;;
+    esac
+    install_prog="$install_prog$arg"
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=no
+    stripme=
+    for arg
+    do
+      if test -n "$dest"; then
+	files="$files $dest"
+	dest="$arg"
+	continue
+      fi
+
+      case $arg in
+      -d) isdir=yes ;;
+      -f) prev="-f" ;;
+      -g) prev="-g" ;;
+      -m) prev="-m" ;;
+      -o) prev="-o" ;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*) ;;
+
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  prev=
+	else
+	  dest="$arg"
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	arg="\"$arg\""
+	;;
+      esac
+      install_prog="$install_prog $arg"
+    done
+
+    if test -z "$install_prog"; then
+      $echo "$modename: you must specify an install program" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prev' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	$echo "$modename: no file or destination specified" 1>&2
+      else
+	$echo "$modename: you must specify a destination" 1>&2
+      fi
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    # Strip any trailing slash from the destination.
+    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
+      destname=
+    else
+      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
+      test "X$destdir" = "X$dest" && destdir=.
+      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files
+      if test $# -gt 2; then
+	$echo "$modename: \`$dest' is not a directory" 1>&2
+	$echo "$help" 1>&2
+	exit 1
+      fi
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case $file in
+	*.lo) ;;
+	*)
+	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case $file in
+      *.$libext)
+	# Do the static libraries later.
+	staticlibs="$staticlibs $file"
+	;;
+
+      *.la)
+	# Check to see that this really is a libtool archive.
+	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+
+	library_names=
+	old_library=
+	relink_command=
+	# If there is no directory component, then add one.
+	case $file in
+	*/* | *\\*) . $file ;;
+	*) . ./$file ;;
+	esac
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) current_libdirs="$current_libdirs $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) future_libdirs="$future_libdirs $libdir" ;;
+	  esac
+	fi
+
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
+	test "X$dir" = "X$file/" && dir=
+	dir="$dir$objdir"
+
+	if test -n "$relink_command"; then
+	  # Determine the prefix the user has applied to our future dir.
+	  inst_prefix_dir=`$echo "$destdir" | sed "s%$libdir\$%%"`
+
+	  # Don't allow the user to place us outside of our expected
+	  # location b/c this prevents finding dependent libraries that
+	  # are installed to the same prefix.
+	  if test "$inst_prefix_dir" = "$destdir"; then
+	    $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
+	    exit 1
+	  fi
+
+	  if test -n "$inst_prefix_dir"; then
+	    # Stick the inst_prefix_dir data into the link command.
+	    relink_command=`$echo "$relink_command" | sed "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	  else
+	    relink_command=`$echo "$relink_command" | sed "s%@inst_prefix_dir@%%"`
+	  fi
+
+	  $echo "$modename: warning: relinking \`$file'" 1>&2
+	  $show "$relink_command"
+	  if $run eval "$relink_command"; then :
+	  else
+	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+	    exit 1
+	  fi
+	fi
+
+	# See the names of the shared library.
+	set dummy $library_names
+	if test -n "$2"; then
+	  realname="$2"
+	  shift
+	  shift
+
+	  srcname="$realname"
+	  test -n "$relink_command" && srcname="$realname"T
+
+	  # Install the shared library and build the symlinks.
+	  $show "$install_prog $dir/$srcname $destdir/$realname"
+	  $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
+	  if test -n "$stripme" && test -n "$striplib"; then
+	    $show "$striplib $destdir/$realname"
+	    $run eval "$striplib $destdir/$realname" || exit $?
+	  fi
+
+	  if test $# -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    for linkname
+	    do
+	      if test "$linkname" != "$realname"; then
+		$show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+		$run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+	      fi
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib="$destdir/$realname"
+	  eval cmds=\"$postinstall_cmds\"
+	  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	  for cmd in $cmds; do
+	    IFS="$save_ifs"
+	    $show "$cmd"
+	    $run eval "$cmd" || exit $?
+	  done
+	  IFS="$save_ifs"
+	fi
+
+	# Install the pseudo-library for information purposes.
+	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	instname="$dir/$name"i
+	$show "$install_prog $instname $destdir/$name"
+	$run eval "$install_prog $instname $destdir/$name" || exit $?
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case $destfile in
+	*.lo)
+	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
+	  ;;
+	*.$objext)
+	  staticdest="$destfile"
+	  destfile=
+	  ;;
+	*)
+	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	if test -n "$destfile"; then
+	  $show "$install_prog $file $destfile"
+	  $run eval "$install_prog $file $destfile" || exit $?
+	fi
+
+	# Install the old object if enabled.
+	if test "$build_old_libs" = yes; then
+	  # Deduce the name of the old-style object file.
+	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
+
+	  $show "$install_prog $staticobj $staticdest"
+	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
+	fi
+	exit 0
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Do a test to see if this is really a libtool program.
+	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  notinst_deplibs=
+	  relink_command=
+
+	  # If there is no directory component, then add one.
+	  case $file in
+	  */* | *\\*) . $file ;;
+	  *) . ./$file ;;
+	  esac
+
+	  # Check the variables that should have been set.
+	  if test -z "$notinst_deplibs"; then
+	    $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
+	    exit 1
+	  fi
+
+	  finalize=yes
+	  for lib in $notinst_deplibs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      # If there is no directory component, then add one.
+	      case $lib in
+	      */* | *\\*) . $lib ;;
+	      *) . ./$lib ;;
+	      esac
+	    fi
+	    libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
+	      finalize=no
+	    fi
+	  done
+
+	  relink_command=
+	  # If there is no directory component, then add one.
+	  case $file in
+	  */* | *\\*) . $file ;;
+	  *) . ./$file ;;
+	  esac
+
+	  outputname=
+	  if test "$fast_install" = no && test -n "$relink_command"; then
+	    if test "$finalize" = yes && test -z "$run"; then
+	      tmpdir="/tmp"
+	      test -n "$TMPDIR" && tmpdir="$TMPDIR"
+              tmpdir=`mktemp -d $tmpdir/libtool-XXXXXX 2> /dev/null`
+              if test $? = 0 ; then :
+              else
+                tmpdir="$tmpdir/libtool-$$"
+              fi
+	      if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
+	      else
+		$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
+		continue
+	      fi
+	      file=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	      outputname="$tmpdir/$file"
+	      # Replace the output file specification.
+	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+
+	      $show "$relink_command"
+	      if $run eval "$relink_command"; then :
+	      else
+		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+		${rm}r "$tmpdir"
+		continue
+	      fi
+	      file="$outputname"
+	    else
+	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
+	    fi
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyways
+	case $install_prog,$host in
+	/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    destfile=`echo $destfile | sed -e 's,.exe$,,'`
+	    ;;
+	  esac
+	  ;;
+	esac
+	$show "$install_prog$stripme $file $destfile"
+	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
+	test -n "$outputname" && ${rm}r "$tmpdir"
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+
+      $show "$install_prog $file $oldlib"
+      $run eval "$install_prog \$file \$oldlib" || exit $?
+
+      if test -n "$stripme" && test -n "$striplib"; then
+	$show "$old_striplib $oldlib"
+	$run eval "$old_striplib $oldlib" || exit $?
+      fi
+
+      # Do each command in the postinstall commands.
+      eval cmds=\"$old_postinstall_cmds\"
+      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$future_libdirs"; then
+      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
+    fi
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      test -n "$run" && current_libdirs=" -n$current_libdirs"
+      exec $SHELL $0 --finish$current_libdirs
+      exit 1
+    fi
+
+    exit 0
+    ;;
+
+  # libtool finish mode
+  finish)
+    modename="$modename: finish"
+    libdirs="$nonopt"
+    admincmds=
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for dir
+      do
+	libdirs="$libdirs $dir"
+      done
+
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  eval cmds=\"$finish_cmds\"
+	  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	  for cmd in $cmds; do
+	    IFS="$save_ifs"
+	    $show "$cmd"
+	    $run eval "$cmd" || admincmds="$admincmds
+       $cmd"
+	  done
+	  IFS="$save_ifs"
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $run eval "$cmds" || admincmds="$admincmds
+       $cmds"
+	fi
+      done
+    fi
+
+    # Exit here if they wanted silent mode.
+    test "$show" = ":" && exit 0
+
+    echo "----------------------------------------------------------------------"
+    echo "Libraries have been installed in:"
+    for libdir in $libdirs; do
+      echo "   $libdir"
+    done
+    echo
+    echo "If you ever happen to want to link against installed libraries"
+    echo "in a given directory, LIBDIR, you must either use libtool, and"
+    echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+    echo "flag during linking and do at least one of the following:"
+    if test -n "$shlibpath_var"; then
+      echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      echo "     during execution"
+    fi
+    if test -n "$runpath_var"; then
+      echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+      echo "     during linking"
+    fi
+    if test -n "$hardcode_libdir_flag_spec"; then
+      libdir=LIBDIR
+      eval flag=\"$hardcode_libdir_flag_spec\"
+
+      echo "   - use the \`$flag' linker flag"
+    fi
+    if test -n "$admincmds"; then
+      echo "   - have your system administrator run these commands:$admincmds"
+    fi
+    if test -f /etc/ld.so.conf; then
+      echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+    fi
+    echo
+    echo "See any operating system documentation about shared libraries for"
+    echo "more information, such as the ld(1) and ld.so(8) manual pages."
+    echo "----------------------------------------------------------------------"
+    exit 0
+    ;;
+
+  # libtool execute mode
+  execute)
+    modename="$modename: execute"
+
+    # The first argument is the command name.
+    cmd="$nonopt"
+    if test -z "$cmd"; then
+      $echo "$modename: you must specify a COMMAND" 1>&2
+      $echo "$help"
+      exit 1
+    fi
+
+    # Handle -dlopen flags immediately.
+    for file in $execute_dlfiles; do
+      if test ! -f "$file"; then
+	$echo "$modename: \`$file' is not a file" 1>&2
+	$echo "$help" 1>&2
+	exit 1
+      fi
+
+      dir=
+      case $file in
+      *.la)
+	# Check to see that this really is a libtool archive.
+	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+
+	# If there is no directory component, then add one.
+	case $file in
+	*/* | *\\*) . $file ;;
+	*) . ./$file ;;
+	esac
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
+	  continue
+	fi
+
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$dir" = "X$file" && dir=.
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  dir="$dir/$objdir"
+	else
+	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+	  exit 1
+	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$dir" = "X$file" && dir=.
+	;;
+
+      *)
+	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -*) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  # If there is no directory component, then add one.
+	  case $file in
+	  */* | *\\*) . $file ;;
+	  *) . ./$file ;;
+	  esac
+
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
+      args="$args \"$file\""
+    done
+
+    if test -z "$run"; then
+      if test -n "$shlibpath_var"; then
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
+      fi
+
+      # Restore saved enviroment variables
+      if test "${save_LC_ALL+set}" = set; then
+	LC_ALL="$save_LC_ALL"; export LC_ALL
+      fi
+      if test "${save_LANG+set}" = set; then
+	LANG="$save_LANG"; export LANG
+      fi
+
+      # Now actually exec the command.
+      eval "exec \$cmd$args"
+
+      $echo "$modename: cannot exec \$cmd$args"
+      exit 1
+    else
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+	$echo "export $shlibpath_var"
+      fi
+      $echo "$cmd$args"
+      exit 0
+    fi
+    ;;
+
+  # libtool clean and uninstall mode
+  clean | uninstall)
+    modename="$modename: $mode"
+    rm="$nonopt"
+    files=
+    rmforce=
+    exit_status=0
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    for arg
+    do
+      case $arg in
+      -f) rm="$rm $arg"; rmforce=yes ;;
+      -*) rm="$rm $arg" ;;
+      *) files="$files $arg" ;;
+      esac
+    done
+
+    if test -z "$rm"; then
+      $echo "$modename: you must specify an RM program" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    rmdirs=
+
+    for file in $files; do
+      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+      if test "X$dir" = "X$file"; then
+	dir=.
+	objdir="$objdir"
+      else
+	objdir="$dir/$objdir"
+      fi
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+      test $mode = uninstall && objdir="$dir"
+
+      # Remember objdir for removal later, being careful to avoid duplicates
+      if test $mode = clean; then
+	case " $rmdirs " in
+	  *" $objdir "*) ;;
+	  *) rmdirs="$rmdirs $objdir" ;;
+	esac
+      fi
+
+      # Don't error if the file doesn't exist and rm -f was used.
+      if (test -L "$file") >/dev/null 2>&1 \
+        || (test -h "$file") >/dev/null 2>&1 \
+	|| test -f "$file"; then
+        :
+      elif test -d "$file"; then
+        exit_status=1
+	continue
+      elif test "$rmforce" = yes; then
+        continue
+      fi
+
+      rmfiles="$file"
+
+      case $name in
+      *.la)
+	# Possibly a libtool archive, so verify it.
+	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  . $dir/$name
+
+	  # Delete the libtool libraries and symlinks.
+	  for n in $library_names; do
+	    rmfiles="$rmfiles $objdir/$n"
+	  done
+	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+	  test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+
+	  if test $mode = uninstall; then
+	    if test -n "$library_names"; then
+	      # Do each command in the postuninstall commands.
+	      eval cmds=\"$postuninstall_cmds\"
+	      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		$show "$cmd"
+		$run eval "$cmd"
+		if test $? != 0 && test "$rmforce" != yes; then
+		  exit_status=1
+		fi
+	      done
+	      IFS="$save_ifs"
+	    fi
+
+	    if test -n "$old_library"; then
+	      # Do each command in the old_postuninstall commands.
+	      eval cmds=\"$old_postuninstall_cmds\"
+	      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		$show "$cmd"
+		$run eval "$cmd"
+		if test $? != 0 && test "$rmforce" != yes; then
+		  exit_status=1
+		fi
+	      done
+	      IFS="$save_ifs"
+	    fi
+	    # FIXME: should reinstall the best remaining shared library.
+	  fi
+	fi
+	;;
+
+      *.lo)
+	if test "$build_old_libs" = yes; then
+	  oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
+	  rmfiles="$rmfiles $dir/$oldobj"
+	fi
+	;;
+
+      *)
+	# Do a test to see if this is a libtool program.
+	if test $mode = clean &&
+	   (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  relink_command=
+	  . $dir/$file
+
+	  rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+	  if test "$fast_install" = yes && test -n "$relink_command"; then
+	    rmfiles="$rmfiles $objdir/lt-$name"
+	  fi
+	fi
+	;;
+      esac
+      $show "$rm $rmfiles"
+      $run $rm $rmfiles || exit_status=1
+    done
+
+    # Try to remove the ${objdir}s in the directories where we deleted files
+    for dir in $rmdirs; do
+      if test -d "$dir"; then
+	$show "rmdir $dir"
+	$run rmdir $dir >/dev/null 2>&1
+      fi
+    done
+
+    exit $exit_status
+    ;;
+
+  "")
+    $echo "$modename: you must specify a MODE" 1>&2
+    $echo "$generic_help" 1>&2
+    exit 1
+    ;;
+  esac
+
+  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+  $echo "$generic_help" 1>&2
+  exit 1
+fi # test -z "$show_help"
+
+# We need to display help for each of the modes.
+case $mode in
+"") $echo \
+"Usage: $modename [OPTION]... [MODE-ARG]...
+
+Provide generalized library-building support services.
+
+    --config          show all configuration variables
+    --debug           enable verbose shell tracing
+-n, --dry-run         display commands without modifying any files
+    --features        display basic configuration information and exit
+    --finish          same as \`--mode=finish'
+    --help            display this help message and exit
+    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
+    --quiet           same as \`--silent'
+    --silent          don't print informational messages
+    --version         print version information
+
+MODE must be one of the following:
+
+      clean           remove files from the build directory
+      compile         compile a source file into a libtool object
+      execute         automatically set library path, then run a program
+      finish          complete the installation of libtool libraries
+      install         install libraries or executables
+      link            create a library or an executable
+      uninstall       remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
+a more detailed description of MODE."
+  exit 0
+  ;;
+
+clean)
+  $echo \
+"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+  ;;
+
+compile)
+  $echo \
+"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -prefer-pic       try to building PIC objects only
+  -prefer-non-pic   try to building non-PIC objects only
+  -static           always build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+  ;;
+
+execute)
+  $echo \
+"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+  ;;
+
+finish)
+  $echo \
+"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+  ;;
+
+install)
+  $echo \
+"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+  ;;
+
+link)
+  $echo \
+"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+		    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+		    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -static           do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+		    specify library version info [each variable defaults to 0]
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+  ;;
+
+uninstall)
+  $echo \
+"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+  ;;
+
+*)
+  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+  $echo "$help" 1>&2
+  exit 1
+  ;;
+esac
+
+echo
+$echo "Try \`$modename --help' for more information about other modes."
+
+exit 0
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
--- gtk+2.0-2.0.2.orig/debian/update-gtk-immodules
+++ gtk+2.0-2.0.2/debian/update-gtk-immodules
@@ -0,0 +1,33 @@
+#! /bin/sh
+
+set -e
+
+TMPFILE=`mktemp /tmp/gtk+-2.0.2.XXXXXXXXXX`
+defaultver=2.0.0
+
+if [ "x$1" != "x" ]; then
+	VERSION=`echo $1 | sed -e 's/-[A-Za-z0-9\.]*$//' -e 's/+[A-Za-z0-9\.]*$//'`
+else
+	VERSION=$defaultver
+fi
+shortver=`echo $VERSION | sed -e 's/\.[0-9]*$//'`
+
+if ! test -d /usr/lib/gtk-$shortver/$VERSION/immodules; then
+	echo "You don't have immodules directory for version $VERSION."
+	echo "Use default version instead."
+	VERSION=$defaultver
+	shortver=`echo $VERSION | sed -e 's/\.[0-9]*$//'`
+fi
+
+echo -n "Updating the IM modules list for GTK+-$VERSION..."
+/usr/bin/gtk-query-immodules-$shortver `find /usr/lib/gtk-$shortver/$VERSION/immodules -name '*.so'` > $TMPFILE
+if [ "x`cat $TMPFILE | grep -v '^#'`" = "x" ]; then
+	echo "the GTK+ IM modules was not found."
+else
+	echo "done."
+fi
+cp $TMPFILE /etc/gtk-$shortver/gtk.immodules
+chmod 644 /etc/gtk-$shortver/gtk.immodules
+
+rm -f $TMPFILE
+
--- gtk+2.0-2.0.2.orig/debian/libgtk2.0-common.postinst
+++ gtk+2.0-2.0.2/debian/libgtk2.0-common.postinst
@@ -0,0 +1,48 @@
+#! /bin/sh
+# postinst script for gtk+
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postinst> `configure' <most-recently-configured-version>
+#        * <old-postinst> `abort-upgrade' <new version>
+#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
+#          <new-version>
+#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
+#          <failed-install-package> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+#
+# quoting from the policy:
+#     Any necessary prompting should almost always be confined to the
+#     post-installation script, and should be protected with a conditional
+#     so that unnecessary prompting doesn't happen if a package's
+#     installation fails and the `postinst' is called with `abort-upgrade',
+#     `abort-remove' or `abort-deconfigure'.
+
+case "$1" in
+    configure)
+	/usr/sbin/update-gtk-immodules
+    ;;
+
+    abort-upgrade|abort-remove|abort-deconfigure)
+
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+
--- gtk+2.0-2.0.2.orig/debian/docs.in
+++ gtk+2.0-2.0.2/debian/docs.in
@@ -0,0 +1,5 @@
+build-tree/gtk+-@VERSION@/NEWS
+build-tree/gtk+-@VERSION@/README
+build-tree/gtk+-@VERSION@/TODO
+build-tree/gtk+-@VERSION@/ChangeLog.pre-1-0
+build-tree/gtk+-@VERSION@/ChangeLog.pre-1-2
--- gtk+2.0-2.0.2.orig/debian/libgtk2.0-doc.doc-base.gdk
+++ gtk+2.0-2.0.2/debian/libgtk2.0-doc.doc-base.gdk
@@ -0,0 +1,13 @@
+Document: gdk
+Title: GDK Reference Manual
+Author: Damon Chaplin et al.
+Abstract: The GDK library provides an OS-independant wrapper around the
+ most fundamental graphical user interface functions.  This allows
+ GTK+ to be ported to non-X11 systems, as long as GDK is ported first.
+ .
+ This document covers programming in GDK.
+Section: Apps/Programming
+
+Format: HTML
+Index: /usr/share/doc/libgtk2.0-doc/gdk/index.html
+Files: /usr/share/doc/libgtk2.0-doc/gdk/*.html
--- gtk+2.0-2.0.2.orig/debian/gtk2.0-examples.files
+++ gtk+2.0-2.0.2/debian/gtk2.0-examples.files
@@ -0,0 +1,3 @@
+usr/bin/gtk-demo
+usr/share/*/demo/*
+
--- gtk+2.0-2.0.2.orig/debian/libgtk2.0-doc.doc-base.gtk
+++ gtk+2.0-2.0.2/debian/libgtk2.0-doc.doc-base.gtk
@@ -0,0 +1,11 @@
+Document: gtk
+Title: GTK+ Reference Manual
+Author: Damon Chaplin et al.
+Abstract: The GTK+ library provides a graphical user interface for
+ C programs, and is used in projects such as GIMP, Gnome, and Mozilla.
+ This document covers programming using the GTK+ library.
+Section: Apps/Programming
+
+Format: HTML
+Index: /usr/share/doc/libgtk2.0-doc/gtk/index.html
+Files: /usr/share/doc/libgtk2.0-doc/gtk/*.html
--- gtk+2.0-2.0.2.orig/debian/libgtk2.0-doc.files
+++ gtk+2.0-2.0.2/debian/libgtk2.0-doc.files
@@ -0,0 +1 @@
+usr/share/doc/libgtk2.0-doc/*
--- gtk+2.0-2.0.2.orig/debian/libgtk2.0-doc.dirs
+++ gtk+2.0-2.0.2/debian/libgtk2.0-doc.dirs
@@ -0,0 +1 @@
+usr/share/doc/libgtk2.0-doc
--- gtk+2.0-2.0.2.orig/debian/libgtk2.0-doc.doc-base.gtk-faq
+++ gtk+2.0-2.0.2/debian/libgtk2.0-doc.doc-base.gtk-faq
@@ -0,0 +1,12 @@
+Document: gtk2-faq
+Title: GTK+2.0 Frequently Asked Questions
+Author: Tony Gale, Shawn Amundson, and Emmanuel Deloget
+Abstract: This document is intended to answer questions that are
+ likely to be frequently asked by programmers using the GTK+ 
+ graphical user interface library, or people who are just looking at 
+ using GTK+, Gnome, or GIMP.
+Section: Apps/Programming
+
+Format: HTML
+Index: /usr/share/doc/libgtk2.0-doc/gtk-faq/index.html
+Files: /usr/share/doc/libgtk2.0-doc/gtk-faq/*.html
--- gtk+2.0-2.0.2.orig/debian/libgtk2.0-doc.doc-base.gdk-pixbuf
+++ gtk+2.0-2.0.2/debian/libgtk2.0-doc.doc-base.gdk-pixbuf
@@ -0,0 +1,12 @@
+Document: gdk-pixbuf
+Title: GDK-pixbuf Reference Manual
+Author: Federico Mena Quintero
+Abstract: The GDK-pixbuf library is used to manipulate images and
+ other image-like objects, similar to the imlib library.  GDK and
+ GTK+ use it for image storage and manipulation.  This document
+ covers programming using this library.
+Section: Apps/Programming
+
+Format: HTML
+Index: /usr/share/doc/libgtk2.0-doc/gdk-pixbuf/index.html
+Files: /usr/share/doc/libgtk2.0-doc/gdk-pixbuf/*.html
--- gtk+2.0-2.0.2.orig/debian/gtk2.0-examples.examples.in
+++ gtk+2.0-2.0.2/debian/gtk2.0-examples.examples.in
@@ -0,0 +1 @@
+build-tree/gtk+-@VERSION@/examples/*
--- gtk+2.0-2.0.2.orig/debian/gtk2.0-examples.dirs
+++ gtk+2.0-2.0.2/debian/gtk2.0-examples.dirs
@@ -0,0 +1,2 @@
+usr/bin
+usr/share
--- gtk+2.0-2.0.2.orig/debian/update-gtk-immodules.1
+++ gtk+2.0-2.0.2/debian/update-gtk-immodules.1
@@ -0,0 +1,31 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH UPDATE-GTK-IMMODULES 1 "13 March 2002"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+update-gtk-immodules \- Update wrapper script for the GTK+ IM modules list
+.SH SYNOPSIS
+.B update-gtk-immodules
+.I package\| version
+.SH DESCRIPTION
+\fIupdate-gtk-immodules\fP is a wrapper script for updating /etc/gtk-2.0/gtk.immodules using \fIgtk-query-immodules-2.0\fP.
+.br
+\fIupdate-gtk-immodules\fP get a argument and /etc/gtk-2.0/gtk.immodules for that version will be generated by \fIgtk-query-immodules-2.0\fP.
+.SH SEE ALSO
+.BR gtk-query-immodules-2.0 (1)
+.SH AUTHOR
+This manual page was written by Akira TAGOH <tagoh@debian.org>,
+for the Debian GNU/Linux system.
--- gtk+2.0-2.0.2.orig/debian/libgtk2.0-common.dirs
+++ gtk+2.0-2.0.2/debian/libgtk2.0-common.dirs
@@ -0,0 +1,5 @@
+usr/bin
+usr/sbin
+usr/share/locale
+usr/share/themes
+etc/gtk-2.0
--- gtk+2.0-2.0.2.orig/debian/libgtk2.0-doc.doc-base.gtk-tutorial
+++ gtk+2.0-2.0.2/debian/libgtk2.0-doc.doc-base.gtk-tutorial
@@ -0,0 +1,18 @@
+Document: gtk2-tutorial
+Title: GTK+2.0 Tutorial
+Author: Tony Gale and Ian Main
+Abstract: GTK (GIMP Toolkit) is a library for creating graphical user
+ interfaces. It is licensed using the LGPL license, so you can develop
+ open software, free software, or even commercial non-free software
+ using GTK without having to spend anything for licenses or royalties.
+ .
+ This tutorial is an attempt to document as much as possible of GTK,
+ but it is by no means complete. This tutorial assumes a good
+ understanding of C, and how to create C programs. It would be a great
+ benefit for the reader to have previous X programming experience, but
+ it shouldn't be necessary.
+Section: Apps/Programming
+
+Format: HTML
+Index: /usr/share/doc/libgtk2.0-doc/gtk-tutorial/index.html
+Files: /usr/share/doc/libgtk2.0-doc/gtk-tutorial/*.html
--- gtk+2.0-2.0.2.orig/debian/libgtk2.0-common.postrm
+++ gtk+2.0-2.0.2/debian/libgtk2.0-common.postrm
@@ -0,0 +1,41 @@
+#! /bin/sh
+# postrm script for gtk+
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postrm> `remove'
+#        * <postrm> `purge'
+#        * <old-postrm> `upgrade' <new-version>
+#        * <new-postrm> `failed-upgrade' <old-version>
+#        * <new-postrm> `abort-install'
+#        * <new-postrm> `abort-install' <old-version>
+#        * <new-postrm> `abort-upgrade' <old-version>
+#        * <disappearer's-postrm> `disappear' <r>overwrit>r> <new-version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+       purge)
+       	rm -rf /etc/gtk-2.0
+	;;
+       remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
+
+
+        ;;
+
+    *)
+        echo "postrm called with unknown argument \`$1'" >&2
+        exit 1
+
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
--- gtk+2.0-2.0.2.orig/debian/update-gtk-immodules.in
+++ gtk+2.0-2.0.2/debian/update-gtk-immodules.in
@@ -0,0 +1,33 @@
+#! /bin/sh
+
+set -e
+
+TMPFILE=`mktemp /tmp/gtk+-@VERSION@.XXXXXXXXXX`
+defaultver=@MODVER@
+
+if [ "x$1" != "x" ]; then
+	VERSION=`echo $1 | sed -e 's/-[A-Za-z0-9\.]*$//' -e 's/+[A-Za-z0-9\.]*$//'`
+else
+	VERSION=$defaultver
+fi
+shortver=`echo $VERSION | sed -e 's/\.[0-9]*$//'`
+
+if ! test -d /usr/lib/gtk-$shortver/$VERSION/immodules; then
+	echo "You don't have immodules directory for version $VERSION."
+	echo "Use default version instead."
+	VERSION=$defaultver
+	shortver=`echo $VERSION | sed -e 's/\.[0-9]*$//'`
+fi
+
+echo -n "Updating the IM modules list for GTK+-$VERSION..."
+/usr/bin/gtk-query-immodules-$shortver `find /usr/lib/gtk-$shortver/$VERSION/immodules -name '*.so'` > $TMPFILE
+if [ "x`cat $TMPFILE | grep -v '^#'`" = "x" ]; then
+	echo "the GTK+ IM modules was not found."
+else
+	echo "done."
+fi
+cp $TMPFILE /etc/gtk-$shortver/gtk.immodules
+chmod 644 /etc/gtk-$shortver/gtk.immodules
+
+rm -f $TMPFILE
+
--- gtk+2.0-2.0.2.orig/debian/libgtk2.0-dbg.files
+++ gtk+2.0-2.0.2/debian/libgtk2.0-dbg.files
@@ -0,0 +1 @@
+usr/lib/debug/*
--- gtk+2.0-2.0.2.orig/debian/libgtk2.0-dbg.dirs
+++ gtk+2.0-2.0.2/debian/libgtk2.0-dbg.dirs
@@ -0,0 +1 @@
+usr/lib/debug
--- gtk+2.0-2.0.2.orig/debian/libgtk2.0-dev.files
+++ gtk+2.0-2.0.2/debian/libgtk2.0-dev.files
@@ -0,0 +1,8 @@
+usr/bin/gdk-pixbuf-csource
+usr/include/*
+usr/lib/lib*.{so,la,a}
+usr/lib/pkgconfig/*.pc
+usr/lib/*/*/*/*{la,a}
+usr/lib/*/include/*.h
+usr/share/aclocal/*
+usr/share/man/man1/gdk-pixbuf-csource.1*
--- gtk+2.0-2.0.2.orig/debian/libgtk2.0-dev.dirs
+++ gtk+2.0-2.0.2/debian/libgtk2.0-dev.dirs
@@ -0,0 +1,5 @@
+usr/bin
+usr/include
+usr/lib
+usr/lib/pkgconfig
+usr/share/aclocal
--- gtk+2.0-2.0.2.orig/debian/gtk2.0-examples.undocumented
+++ gtk+2.0-2.0.2/debian/gtk2.0-examples.undocumented
@@ -0,0 +1 @@
+gtk-demo.1
--- gtk+2.0-2.0.2.orig/debian/libgtk2.0-common.manpages
+++ gtk+2.0-2.0.2/debian/libgtk2.0-common.manpages
@@ -0,0 +1 @@
+debian/update-gtk-immodules.1
--- gtk+2.0-2.0.2.orig/debian/libgtk2.0-common.undocumented
+++ gtk+2.0-2.0.2/debian/libgtk2.0-common.undocumented
@@ -0,0 +1 @@
+gtk-query-immodules-2.0.1
